A system of vertical wells was evaluated for its potential to add moisture into landfilled waste. Leachate (and groundwater) was added through 78 vertical wells installed at three different depths. The results of injection tests performed over a 17month duration are presented in this paper. A total of 17,700 m of leachate and groundwater were injected over ____hours of operation time. No signif...

The acceptance of the KEK booster has large side value (272 π mm mrad in the horizontal plane and 61π mm mrad in the vertical plane). To increase the beam intensity we have been trying to achieve painting injection in the horizontal plane. The intensity-dependent emittanceexchanges in the horizontal and vertical plane were measured by a method using a scraper and bump magnets method. In order t...

To investigate striatal mechanisms underlying the acute effects of stimulants on motor behavior, firing rates (FRs) of striatal neurons related specifically to vertical head movement were studied exclusively during vertical head movements. Precocaine FRs were recorded after intraperitoneal saline injection (time 1; T1), and rats performed conditioned vertical head movements (>10,000) similar to...

In previous Compact Toroid (CT) injection experiments on several tokamaks, although CT fuelling had been successfully demonstrated, the CT fuelling process has been not clear yet. We have thus conducted CT injection into simple toroidal or vertical vacuum magnetic fields to investigate quantitatively dynamics of CT plasmoid in the penetration process on a spherical tokamak (ST) device. Understa...

The effect of a combined system of the bed suction and jet injection as a pier-scour countermeasure on the turbulent flow field is studied in a laboratory flume using an Acoustic Doppler Velocimeter (ADV). The three components of the velocities in the vertical symmetry plane in the equilibrium scour hole in front and rear of the pier under 3-jet injections and bed suction rate Qs/Q0 = 2%located...

Non-inductive current start-up experiments by using electron cyclotron heating and current drive (ECH/ECCD) technique has been conducted in the Compact Plasma-wall-interaction experimental Device (CPD), which is a small spherical tokamak device. By applying 8.2 GHz RF under steady external fields, plasma currents are generated and closed flux surface configurations are formed spontaneously. Two...

This investigation experimentally demonstrates the dynamic characteristics of quantum dot vertical-cavity surface-emitting lasers (QD VCSEL) without and with light injection. The QD VCSEL is fully doped structure on GaAs substrate and operates in the 1.3 mum optical communication wavelength. The eye diagram, frequency response, and intermodulation distortion are presented. We also demonstrate t...

An analysis is performed to study the heat transfer characteristics of steady mixed convection flow over a permeable vertical flat plate embedded in an anisotropic fluid-saturated porous medium. The effects of uniform suction and injection on the flow field and heat transfer characteristics are numerically studied by employing an implicit finite difference Keller-box method. It is found that du...

We report on the modulation responses of an injection-locked vertical-cavity surface-emitting laser (VCSEL) measured using optical spin-polarization technique. reveal that weak injection locking is suitable to maintain a strong resonance response at high-frequency region depending linear birefringence VCSEL, unique feature response. The results can be reasonably reproduced with simulated ones b...