The success of quenching process during industrial heat treatment mainly depends on the heat transfer characteristics of the quenching medium. In the case of quenching, the scope for redesigning the system or operational parameters for enhancing the heat transfer is very much limited and the emphasis should be on designing quench media with enhanced heat transfer characteristics. Recent studies...

Nanofluids are new generation heat transfer fluids and have opened a new horizon in the areas of heat transfer applications. Nanofluids are prepared by dispersing nano-sized metallic particles in conventional fluids of heat transfer. Heat transfer performance of nanofluid depends primarily on its thermo physical properties like viscosity, thermal conductivity, specific heat and density. Viscosi...

Articles you may be interested in Shear-rate dependent effective thermal conductivity of H2O+SiO2 nanofluids Sequential bond energies and barrier heights for the water loss and charge separation dissociation pathways of Cd2+(H2O) n , n = 3–11 The effect of particle size on the effective thermal conductivity of Al 2 O 3-water nanofluids The International Association for the Properties of Water a...

The optimization of the poor heat transfer characteristics of fluids conventionally employed in solar devices are at present one of the main topics for system efficiency and compactness. In the present work we investigated the optical and thermal properties of nanofluids consisting in aqueous suspensions of single wall carbon nanohorns. The characteristics of these nanofluids were evaluated in ...

: The effective dynamic viscosity was measured in the graphite water-based nanofluids. The shear thinning non-Newtonian behavior is observed in the measurement. On the basis of the best fitting of the experimental data, the viscosity at zero shear rate or at infinite shear rate is determined for each of the fluids. It is found that increases of the particle volume concentration and the holding ...

For better understanding the effect of nanofluid flow in a porous medium, a set of experiments were conducted on a horizontal glass micromodel for Al2O3-water nanofluids. To characterize the flow of nanofluids the same experiment was done by pure water. The glass micromodel was constructed by a photolithography techniqu...

The cooling system of an Automobile plays an important role in its performance, consists of two main parts, known as radiator and fan. Improving thermal efficiency of engine leads to increase the engine's performance, decline the fuel consumption and decrease the pollution emissions. Water and ethylene glycol as conventional coolants have been widely used in radiators of an automotive industry ...

Increasing interests have been paid to nanofluids because of the intriguing heat transfer enhancement performances presented by this kind of promising heat transfer media. We produced a series of nanofluids and measured their thermal conductivities. In this article, we discussed the measurements and the enhancements of the thermal conductivity of a variety of nanofluids. The base fluids used in...

The main reason for using alternative fuels in compression ignition engine is that the consumption and demand of petroleum products are increasing every year due to urbanization, increase in vehicular density and power requirement is going up and to reduce emission produced by today’s diesel engine, which in turns require a clean burning fuel that perform well under the variety of operating con...

Heat transfer phenomena of flat plate solar collector filled with different nanofluids has been investigated numerically. Galerkin’s Finite Element Method is used to solve the problem. Heat transfer rate, average bulk temperature, average sub-domain velocity, outlet temperature, thermal efficiency, mean entropy generation and Bejan number has been investigated by varying the solid nanoparticle ...