The accurate control of the wellbore pressure not only prevents lost circulation/blowout and fracturing formation by managing the density of the drilling fluid, but also improves productivity by mitigating reservoir damage. Calculating the geothermal pressure of a geothermal well by constant parameters would easily bring big errors, as the changes of physical, rheological and thermal properties...

Wellbores in Enhanced Geothermal System extends several kilometers from the ground surface, providing large heat transfer areas between the flowing fluid and the surrounding formations. Various techniques and approximations to model wellbore heat transfer have been presented in the literature. Most of the wellbore simulators assume steady one-dimensional flowing without considering heat transfe...

Hydraulic dispersion in porous media and in fracture networks results in the spreading of the timedependent tracer signal. In geothermal reservoirs the wellbore often intersects fractures that are separated by tens or even hundreds of meters. The mixing in the wellbore at those separated fractures is also a source of dispersion, since tracer signals sampled at the wellhead are a mixture of the ...

Hydraulic fracturing is an effective technique for increasing the productivity of wells producing from low permeability formations. Tracer fracture monitoring technique is near-wellbore zone frctures direct test method that can monitor the height and width of hydraulic fractures in the near-wellbore section. ZeroWash Tracer uses a medium strength ceramic proppant which is mainly used in fractur...

A model coupling fluid hydraulics in a borehole with fluid flow in an aquifer is developed in this paper. Conservation of momentum is used to create a one-dimensional steady-state model of vertical flow in an open borehole combined with radially symmetric flow in an aquifer and with inflow to the well through the wellbore screen. Both laminar and turbulent wellbore conditions are treated. The i...

Wellbore stability analysis based on a new true-triaxial failure criterion i Abstract A main aspect of wellbore stability analysis is the selection of an appropriate rock failure criterion. The most commonly used criterion for brittle failure of rocks is the Mohr-Coulomb criterion. This criterion involves only the maximum and minimum principal stresses, σ 1 and σ 3 , and therefore assumes that ...

Sand production and blockage are common during the drilling and production of horizontal oil and gas wells as a result of formation breakdown. The use of high-pressure rotating jets and annular helical flow is an effective way to enhance horizontal wellbore cleanout. In this paper, we propose the idea of using supercritical CO2 (SC-CO2) as washing fluid in water-sensitive formation. SC-CO2 is m...

Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing determination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical met...

Abstract Wellbore instability severely constrains the exploration and development of shale gas. In order to evaluate impacts anisotropy water on wellbore instability, three different types criteria are fitted strength data LMX shales with moisture contents. A new model transversely isotropic borehole stability considering compliance incremental tensor induced by natural fractures is proposed, t...