The exhaust air energy recovery wind turbine generator is an on-site clean energy generator that utilizes the advantages of discharged air which is strong, consistent and predictable. Two vertical axis wind turbines (VAWTs) in cross-wind orientation which are integrated with an enclosure are installed above a cooling tower to harness the discharged wind for electricity generation. It is mounted...

In this paper, an analytical method for vibrations analysis of offshore wind turbine towers with fixed monopile platform is presented. For this purpose, various and the most general models including CS, DS and AF models are used for modeling of wind turbine foundation and axial force is modeled as a variable force as well. The required equations for determination of wind turbine tower response ...

the wind pressure is one of the important loads on cooling towers which can be computed via numerical solution of the wind flow. in this paper, the effects of turbulent modeling on accurate computations of wind pressure on a cooling tower with base structure are investigated. for this propose, the results of a finite element flow solver using various commonly used turbulence models are compared...

In the past, wind towers were applied as the main architectural part of building construction in the desert areas of Iran. These almost high structures were used as cooling load suppliers at residential buildings. In the present study, the effect of symmetric four-sided wind tower in flow induction to the bottom space has been analysed by using a wind tunnel and numerical simulations. In the nu...

Mechanical Heating Ventilation and Air-Conditioning (HVAC) systems account for 60% of the total energy consumption of buildings. As a sector, buildings contributes about 40% of the total global energy demand. By using passive technology coupled with natural ventilation from wind towers, significant amounts of energy can be saved, reducing the emissions of greenhouse gases. In this study, the de...

Individual blade pitch state space (IBP SS) control and disturbance accommodating control (DAC) that reject wind speed perturbations are applied on a 5 MW wind turbine mounted on the barge and tension leg floating platforms for performance comparison in above rated wind speed region. The DAC used in this study is simply an IBP SS controller with a wind speed disturbance rejection component. For...

A vertical axis wind turbine (VAWT) was positioned at the discharge outlet of a cooling tower electricity generator. To avoid a negative impact on the performance of the cooling tower and to optimize the turbine performance, the determination of the VAWT position in the discharge wind stream was conducted by experiment. The preferable VAWT position is where the higher wind velocity matches the ...

During five autumn weeks, measurements of turbulent fluxes were obtained in the Baltic Sea at three levels on a 30-m tower and two levels on an ASIS buoy 4 km from the tower together with profiles of wind and temperature. Wave data and SST were obtained from ASIS. In the mean, momentum fluxes measured on the tower and on ASIS during onshore winds agree closely. Dimensionless wind gradients fm(z...

With the wind turbines being produced toward to large scale and light weight, the flexibility of blade, drive mechanism and tower increase apparently. Loads suffered by wind turbines during operation become increasingly intricate. Some control approaches could be used to cut down these loads in orde to expand life cycle of generating sets. Aiming at the full load operation zone above rated wind...

A support tower is the main structure which would support rotor, power transmission and control systems, and elevates the rotating blades above the earth boundary layer. A successful design should ensure safe, efficient and economic design for the whole wind turbine system. It should provide easy construction and easy access for maintenance of the rotor components and sub-components. UHPC mater...