Abstract The accuracy of wind flow simulation in mountain area micro-topography is related to discrete scheme, turbulence model and wall function. In this paper, the standard hill adopt analyze calculation different models. Four models, including RNG k-ε, k-ω , SST TSST were used calculation, compared with result tunnel test. results second-order upwind or scalable function are basically consis...

We calibrate the k-ωSST turbulence model for free surface flows in channel or on slope using machine learning techniques. To model, an experiment is carried out inclined rectangular research chute. In experiment, pressure values flow are measured at different distances from bottom; after transforming data, velocity profile obtained. The calibrated based experimental data Nelder-Mead optimizatio...

The underexpanded microjet emerging from a rectangular convergent nozzle with high aspect ratio at the exit is investigated numerically using Reynolds-averaged Navier-Stokes (RANS) simulation Menter’s shear stress transport (SST) k-ω turbulence model. performed pressure of 5.0 to produce strong shock and it validated by comparison rainbow schlieren picture microjet. three-dimensional structure ...

The wind loads considerably influence lightweight spatial structures. An example of spatial structures is scallop domes that contain various configurations and forms and the wind impact on a scallop dome is more complex due to its additional curvature. In our work, the wind pressure coefficient (Cp ) on the scallop dome surface is studied numerically and experimentally. Firstly, the programming...

This study proposes a high-resolution processing technique for seismic data based on the improved synchrosqueezing transform (SST). The SST rearranges complex spectrum of wavelet along frequency axis. However, energy is not concentrated in position with faster change rate. To overcome these problems, proposed method first transformed signal into an analytical one via Hilbert transformation and ...

In this paper, a numerical assessment of the effect shallow water on total resistance solar catamaran SolarCat is carried out using computational fluid dynamics within software package STAR–CCM+. The unsteady viscous flow was modelled based Reynolds-averaged Navier–Stokes (RANS) equations with application k−ω SST (k−ω Shear Stress Transport) turbulence model. RANS were discretized by finite vol...

To select a more suitable turbulence model to study tire aerodynamics, the characteristics of deformed profile 185/65 R14 passenger were reproduced using 3D printing technology. Based on distance from automobile chassis ground, partially loaded with height 150 mm was selected in this paper, and surface pressure coefficient determined wind tunnel test. A computational fluid dynamics (CFD) establ...

Wind energy is one of the clean renewable energy. However, the low frequency (20-200HZ) noise generated from the wind turbine blades, which bothers the residents, becomes the major problem to be developed. It is useful for predicting the aerodynamic noise by flow field and pressure distribution analysis on the wind turbine blades. Therefore, the main objective of this study is to use different ...

In this work the steady-state flow in a commercial dry powder inhaler device, DPI (i.e., Turbuhaler) is described using computational fluid dynamics. The Navier-Stokes equations are solved using commercial CFD software considering different flow models, i.e., laminar, k-ε, k-ε RNG, and k-ω SST as well as large Eddy simulation. Particle motion and deposition are described using a Eulerian-fluid/...

Abstract The paper presents an investigation of the slip length effect on flow around a circular cylinder at Reynolds number Re = 2.5·10 5 . study was performed by means numerical simulation with URANS approach based k -ω SST model. Calculations show significant patterns. With increase in length, drag coefficient noticeably decreases and pulsations lift force reduce. separation from is delayed,...