Owing to high specific strength and designability, unidirectional carbon fiber reinforced polymer (UD-CFRP) has been utilized in numerous fields to replace conventional metal materials. Post machining processes are always required for UD-CFRP to achieve dimensional tolerance and assembly specifications. Due to inhomogeneity and anisotropy, UD-CFRP differs greatly from metal materials in machini...

This paper presents results of testing eccentrically loaded columns externally wrapped with two types of materials. Six cylindrical (205 mm diameter and 925 mm height) plain columns were cast and tested. Half of the columns were wrapped with GFRP and the other half with CFRP. All columns were tested by applying an axial load at 50 mm eccentricity. In each group (GFRP or CFRP wrapped) of columns...

This research program is intended to verify the influence of using distributed external U-wrap CFRP anchorage to shift the failure mode from overall debonding to sectional flexural failure for concrete beams externally bonded with CFRP sheets. Premature cover delamination and FRP debonding are predominant failure modes in FRP flexural strengthening that may be delayed or prevented by using FRP ...

The objective of this paper was to explore the bond-slip relationship between carbon fiber-reinforced polymer (CFRP) sheets and concrete under cyclic loading through experimental and analytical approaches. Modified beam tests were performed in order to gain insight into the bond-slip relationship under static and cyclic loading. The test variables are the CFRP-to-concrete width ratio, and the b...

Carbon fibre reinforced plastic (CFRP) laminates are getting more widely used outside the aerospace industry. For large structures the selected process is often vacuum infusion, due to tool cost and heating/pressure limitations for large components. It has also been shown that such process can give sufficient mechanical properties. In the current EUROPE 103-014 project, supported by the Western...

The purpose of this study was to investigate how different materials affect the magnetic resonance imaging (MRI) detectability of interbody test spacers (ITS). We evaluated the post-implantation MRI scans with T1 TSE sequences for three different ITS made of titanium, carbon fibre-reinforced polymers (CFRP) and titanium-coated CFRP, respectively. The main target variables were total artefact vo...

This paper presents the details and relevant findings of an experimental program which was conducted in three phases to investigate the behavior of steel-concrete composite bridge girders strengthened with new high modulus carbon fiber reinforced polymer (HM CFRP) materials. In the first phase, the feasibility of various lIM CFRP strengthening systems was examined. The second phase investigated...

در این مقاله حل دقیق ارتعاش برون صفحه‌ای نانو ورق‌های مستطیلی نسبتاً ضخیم براساس تئوری غیر‌محلی تغییر شکل برشی سینوسی اصلاح شده با نظر گرفتن شرایط مرزی لوی ارائه است. هدف اصلی تحقیق بررسی اثر مقیاس کوچک بر پارامترهای فرکانسی می‌باشد. برای توصیف تأثیرات خارج از صفحه‌ی ورق غیر محلی ارینگن استفاده شده. مشتمل شش حالت مختلف شامل دو ضلع موازی دارای تکیه‌گاه ‌ساده و اضلاع دیگر ترکیبی ساده، گیردار آزاد ...