The three major distress conditions affecting the performance of asphalt pavements are permanent deformation or rutting, fatigue or load associated cracking, and low temperature or thermal cracking. In an earlier technical topics article (Fall, 1998), we examined the causes of fatigue cracking and the importance of good compaction during construction to help minimize this type of distress. In t...

In the Mechanistic–Empirical Pavement Design Guide (MEPDG), dynamic modulus of asphalt mixes is used as one of the input parameters in pavement analysis and design. For in-service pavements, MEPDG method uses a combination of some field and laboratory tests for structural evaluation of asphalt layers in rehabilitation projects. In this study, ten new and rehabilitated in-service asphalt pavemen...

Asphalt concrete pavements have a short life cycle, failing mainly due to temperature changes, traffic loading and ageing. Modified asphalt mixtures provide the technology to produce a bituminous binder with improved viscoelastic properties, which remain in balance over a wider temperature range and loading conditions. In this research, 60/70 penetration grade asphalt binder was modified by add...

The permanent deformation pavement of roads and streets at tropical zones Abstract (if layers are sufficiently compacted) is due to increase of asphalt layers temperature and consequential decrease of modulus of elasticity. Therefore, the asphalt mixture moves aside of the wheels of heavy vehicles and cause permanent deformations without volume variation. On the other hand, if the asphalt layer...

knowledge of the warming or cooling effects induced by asphalt or grass covered areas, may improve our understanding of how thermal stress or thermal comfort is created for workers who have to work outdoors for long hours in warm seasons. for this purpose a field measurements were carried out to know the cooling and warming effects of two adjacent areas, one covered with grass and the other wit...

This article outlines the ultrasound data employed to calibrate in the laboratory an analytical model that permits the calculation of the depth of partial-depth surface-initiated cracks on bituminous pavements using this non-destructive technique. This initial calibration is required so that the model provides sufficient precision during practical application. The ultrasonic pulse transit times...

The finite element (FE) method has been widely used in predicting the structural responses of asphalt pavements. However, the three-dimensional (3D) modeling in general-purpose FE software systems such as ABAQUS requires extensive computations and is relatively time-consuming. To address this issue, a specific computational code EasyFEM was developed based on the finite layer method (FLM) for a...

The urban, constructed areas are full of buildings and different kinds of pavements and have a noticeable lack of trees and flora. These areas are accumulating the heat from the Sun, people, vehicles, and constructions. One interesting heat collector is the asphalt pavement. How does the heat transfer to different layers under the pavement or does it? What are the temperatures under the pavemen...

MATERIALS Pavement Core Samples COAL TAR AND ASPHALT CEMENT SAMPLES METHODS OF ANALYSIS Binder Content PAH Analysis Analysis of Phenols Modified Ames Assay RESULTS Coal Tar and Asphalt Cement Core Sample Analyses COMPARISON OF CORE SAMPLES WITH U.S. AND EUROPEAN ASPHALT AND COAL TARS COMPARISON OF DIN METHOD FOR PHENOLS WITH THE CORE SAMPLES COMPARISON OF MODIFIED AMES TEST RESULTS DISCUSSION C...

The concept of extracting heat energy from asphalt pavements has been investigated in this study. The scope of work consisted of finite element modeling and testing with small and large scale asphalt pavement samples. Water flowing through copper tubes inserted within asphalt pavements samples were used as heat exchangers in the experiments. The rise in temperature of water as a result of flow ...