Carbon disulfide (CS2) is a typical organic sulfur compound emitted from many industrial processes, such as petrochemical, smelting, et al. Chemical adsorption promising method for CS2 removal and Fe based adsorbents usually show excellent performance. Single-atom catalysts (SACs) always perform magical effects in various heterogeneous reactions. In this work, pyrolyzing coordinated polymer (PC...

The purpose of this study was to use a tape casting technique to develop an Al2O3 fiber-reinforced Al2O3-based ceramic material (Al2O3-fiber/Al2O3 composite) into a new type of dental ceramic. The Al2O3-based ceramic used a matrix consisting of 60 wt% Al2O3 powder and 40 wt% SiO2-B2O3 powder. The prepreg sheets of Al2O3-fiber/Al2O3 composite (in which uniaxially aligned Al2O3 fibers were infilt...

Owing to the combined advantages of Al-Si alloy and Al2O3, Al-Si@Al2O3 is widely utilized as a heat storage material, catalyst carrier, water adsorption host. Hence, preparation corresponding precursors utmost significance. Herein, an Al-Si@Al(OH)3 precursor investigated, Al(OH)3 nanosheets are in situ formed on surface Al1-xSix, where x = 0,10, 0,20, 0,30 presence water. The influence Si conte...

Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...

Zincian georgeite, an amorphous copper-zinc hydroxycarbonate, has been prepared by co-precipitation using acetate salts and ammonium carbonate. Incorporation of zinc into the georgeite phase and mild ageing conditions inhibits crystallisation into zincian malachite or aurichalcite. This zincian georgeite precursor was used to prepare a Cu/ZnO catalyst, which exhibits a superior performance to a...

The influence of processing parameters of aluminum oxide (Al2O3) and lanthanum oxide (La2O3) gate dielectric is investigated. Trimethylaluminum (TMA) and tris(isopropylcyclopentadienyl) lanthanum [La(iPrCp)3] were used as precursors separately, and H2O was used as oxidant. The ultra-thin La1 - x Al x O3 gate dielectric films are deposited on p-type silicon substrates by atom layer deposition (A...

Hydrophobic Y-zeolite (SiO2/Al2O3 = 810) and TiO2 composite photocatalysts were designed by using two different types of TiO2 precursors, i.e., titanium ammonium oxalate and ammonium hexafluorotitanate. The porous structure, surface property and state of TiO2 were investigated by various characterization techniques. By using an ammonium hexafluorotitanate as a precursor, hydrophobic modificatio...

Zincian georgeite, an amorphous copper–zinc hydroxycarbonate, has been prepared by co-precipitation using acetate salts and ammonium carbonate. Incorporation of zinc into the georgeite phase and mild ageing conditions inhibits crystallisation into zincian malachite or aurichalcite. This zincian georgeite precursor was used to prepare a Cu/ZnO catalyst, which exhibits a superior performance to a...

IBA methods were applied to measure elemental depth profiles of precursors and superconducting MgB2 thin films deposited on glassy carbon (Good Fellows) and sapphire (Al2O3) substrates. For each type of substrates we obtained a pair of samples i.e. one amorphous precursor and one superconducting film which were then characterized. A He beam was used to bombard both, precursors and superconducti...

Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...