Fast Reacting Nano-Composite Energetic Materials: Synthesis and Combustion Characterization Report Title Energetic composites are mixtures of solid fuel and oxidizer particles that when combined offer higher calorific output than monomolecular explosives. The composites traditionally deliver energy as diffusion limited reactions and thus their power available from reaction is much smaller than ...

Polymers have lower resistance to scratching and wear than metals. Liquid lubricants work well for metals but not for polymers nor for polymer-based composites (PBCs). We review approaches for improvement of tribological properties of polymers based on inclusion of fillers. The fillers can be metallic or ceramic-with obvious consequences for electrical resistivity of the composites. Distinction...

Carbon monofluoride (CFx) has a high energy density, exceeding 2000 W h kg(-1), yet its application in primary lithium batteries is limited by its power capability. Multi-walled carbon nanotubes (CNTs) are appealing additives for high-power batteries, due to their outstanding electronic transport properties, high aspect ratio necessitating low volume fraction for percolation, and high tensile s...

Nanoscale thermites such as the composite mixture of nano-sized aluminum and molybdenum trioxide powders possess several technical advantages such as much higher reaction rate and shorter ignition delay, when compared to the conventional energetic formulations made of micron-sized metal and oxidizer particles. In this study, the self-propagation of combustion wave in compacted pellets of nanosc...

Carbon nanotube-copper (CNT/Cu) composites have been successfully synthesized by means of a novel particles-compositing process followed by spark plasma sintering (SPS) technique. The thermal conductivity of the composites was measured by a laser flash technique and theoretical analyzed using an effective medium approach. The experimental results showed that the thermal conductivity unusually d...

Different volume fractions (1.3, 2.6, and 7.6 Vol.%) of carbon nanotubes (CNTs) were dispersed within 8Y-TZP nanopowders. Mixed powder specimens were subsequently processed by spark plasma sintering (SPS) and effects of CNTs on the sintering process of 8Y-TZP/CNT composites was studied. Maintenance of CNTs through the SPS process was confirmed using TEM and Raman Spectroscopy. Studies on the si...

Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders...

Reinforcement of aluminum and alloys with graphene has been intensively practiced by researchers in the past dozen years. The role Al4C3, which could be produced unintentionally or purposefully during composite production, was controversial until it found that nano-sized carbides were beneficial for strengthening composites. aluminum-graphene-nano-sized Al4C3 composites us using powder metallur...

Additions of high modulus nano particles to Aluminum alloys offer the potential to develop a lightweight composite with high mechanical properties. It is extremely difficult to disperse nano-sized ceramic particles uniformly in molten metal. In order to investigate the effect of nano-alumina on the microstructure and mechanical properties of composite, a new method was used in stir casting to a...

Assembly of carbon nanotubes (CNTs) in effective and productive ways is of vital importance to their application. Recent progress in synthesis of CNTs has inspired new strategies for utilizing the unique physiochemical properties of CNTs in macroscale materials and devices. Assembling CNTs by dry processes (e.g., directly collecting CNTs in the form of freestanding films followed by pressing, s...