A bottom-up approach to produce a long-range ordered superlattice of monodisperse and isomorphic metal-oxide nanoparticles (NP) supported onto an oxide substrate is demonstrated. The synthetic strategy consists of self-assembling metallic NP on an ultrathin nanopatterned aluminum oxide template followed by a morphology-conserving oxidation process, and is exemplified in the case of Ni, but is g...

A highly active heterogeneous Fenton catalyst was fabricated by impregnating iron oxide nanoparticles in alumina coated mesoporous SBA-15 silica.

background: an increase in surface roughness of ceramics may decrease strength and affect the clinical success of ceramic restorations. however, little is known about the effect of acidic agents on ceramic restorations. the aim of this study was to evaluate the surface roughness of dental ceramics after being immersed in acidic agents.     methods: eighty-three ceramic disk specimens (12.0 mm i...

Alumina is the most widely used oxide ceramic material. It exists in many metastable forms which lead upon severe thermal treatment towards the thermodynamically stable phase alpha. Sintering of alumina generally takes part in a minimum of two stages: i) phase transition(s) towards the stable phase alpha and ii) densification of this phase alpha. The former step(s), linked to transition phase(s...

Transition aluminas, and especially the gamma type, are largely used as catalyst supports in refining and petrochemicals. Most studies focus on properties resulting from material texture and casting (specific surface, porous volume, pore shape and diameter). However, surface properties of alumina should be considered as well, as the catalytic activity is tightly related to the structure of expo...

This study integrates the techniques of nanoelectroforming, hot-embossing, and electrochemical deposition to develop a disposable, low-cost, and high sensitivity nanostructure biosensor. A modified anodic aluminum oxide barrier-layer surface was used as the template for thin nickel film deposition. After etching the anodic aluminum oxide template off, a three-dimensional mold of the concave nan...

This research presents the interaction of the epoxy polymer diglicydil ether of bisphenol-A (DGEBA) with silica (SiO₂) nanoparticles plus zirconia (ZrO₂) nanoparticles obtained via the sol-gel method in the synthesis of an epoxy-silica-zirconia hybrid adhesive cured with polyamide. ZrO₂ nanoparticles were added to the epoxy-silica hybrid adhesive produced in situ to modify the apparent shear st...

Abstract: Nanoparticles exhibit a high reactivity and strong tendency towards agglomeration. In this study, aluminum oxide (alumina) nanoparticles were characterized by gas adsorption (BET), transmition electron microscopy (TEM) and photon correlation spectroscopy (PCS) techniques to assess the agglomeration of the particles. There is a good correlation between the BET and TEM measurements b...

In this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(V/V) percent of the reports. The overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

The study aimed to prepare Al2O3 nanoparticles (NPs) from aluminum wastes (originate workshops as waste) and tested its antimicrobial activity against bacteria (Gram-negative): Escherichia coli ATCC25922, Salmonella Typhimurium ATCC14028, Pseudomonas aeruginosa ATCC27853, Alcaligenes aquatilis (Gram-positive): Staphylococcus aureus ATCCBAA977 Streptococcacea pneumonia ATCC49619, types of Fungal...