We present here the behavior of the resonance frequency of porous anodic alumina cantilever arrays during water vapor adsorption and emphasize their possible use in the micromechanical sensing of humidity levels at least in the range of 10-22%. The sensitivity of porous anodic aluminium oxide cantilevers (Δf/Δm) and the humidity sensitivity equal about 56 Hz/pg and about 100 Hz/%, respectively....

Atomic layer deposition (ALD) has been used in advanced applications where thin layers of materials with precise thickness down to the nanometer scale are needed. Using anodic oxidation, we prepared the porous alumina. Anodic oxidation was carried out in 5 C 0.3M oxalic acid with anodizing voltages (~ 40 V) and two step anodization method. SEM shows that, these porous anodic oxides are well ali...

Titanium implants have a thin oxide surface layer. The properties of this oxide layer may explain the good biocompatibility of titanium implants. Anodic oxidation results in a thickening of the oxide film, with possible improved biocompatability of anodized implants. The aim of the present study was twofold: (1) firstly, to characterize the growth behaviour of galvanostatically prepared anodic ...

-Anodizing of AZ 31 Mg alloy was investigate in 3M KOH solution for 10, 20 and 30min. at constant voltage of 5V. Atomic force microscope (AFM) used to investigate the roughness of anodic film formed on the surface while the scanning electron microscope (SEM) was used to determine the morphology of the anodic film, it was found that the roughness of the anodic film is mainly depend on the anodiz...

This study investigated the oxidation of ascorbic acid (Vitamin C) using a platinum nanoparticle electrode coated with an iodine monolayer, called a modified electrode. The electrode were grown using the cyclic voltammetry technique and the electrochemical measurements were taken using the cyclic voltammetry and chronoamperometric technique. In the case of platinum nanoparticle electrode modifi...

The corrosion inhibition of ST37 Carbon Steel in 1.0 M HCl by aquatic extract of coconut has been studied as a possible source of green inhibitor using the potentiodynamic polarization and electrochemical impedance spectroscopy techniques. The aquatic extract of coconut have many advantages over classical techniques of sample preparation of plant gums (such as drying and solvent reflux).Pol...

The electrophoretic separations of some human and pig liver enzymes on cellulose acetate and Cellogel were investigated, with reference to their joint occurrence in serum of patients undergoing treatment by extracorporeal pig liver perfusion. In every case it was possible to distinguish between the human and pig enzymes. Pig lactate dehydrogenase isoenzymes occupy a position slightly anodic to ...

background: electrochemical methods, as one of the advanced oxidation processes (aops), have recently been applied to remove different contaminants from water and wastewater. this study compares the performance of anodic oxidation (ao) and electro-fenton (ef) methods on waste sludge treatment. methods: this experimental study was performed on real sludge and the effect of operating parameters s...

Biochemical oxygen demand (BOD) is a widely used index of water-quality assessment. Since bioelectrochemical BOD biosensors require anaerobic conditions for anodic reactions, they are not directly used in aerobic environments such as aeration tanks. Normally, the BOD biosensors are closed-type, where the anode is packed inside a closed chamber to avoid exposure to oxygen. In this study, a novel...