Al-doped ZnO (AZO) thin films were deposited directly on p-GaN substrates by using a two-step deposition consisting of polymer assisted deposition (PAD) and atomic layer deposition (ALD) methods. Ohmic contacts of the AZO on p-GaN have been formed. The lowest sheet resistance of the two-step prepared AZO films reached to 145 Ω/sq, and the specific contact resistance reduced to 1.47 × 10-2 Ω·cm2...

In this paper, a micro-fluidic optimized process for the continuous flow synthesis of azo compounds is presented. The continuous flow synthesis of Sudan II azo dye was used as a model reaction for the study. At found optimal azo coupling reaction temperature and pH an investigation of the optimum flow rates of the reactants for the diazotization and azo coupling reactions in Little Things Facto...

Aluminum-doped zinc oxide (ZnO:Al) [AZO] is a good candidate to be used as a transparent conducting oxide [TCO]. For solar cells having a hydrogenated amorphous silicon carbide [a-SiC:H] or hydrogenated amorphous silicon [a-Si:H] window layer, the use of the AZO as TCO results in a deterioration of fill factor [FF], so fluorine-doped tin oxide (Sn02:F) [FTO] is usually preferred as a TCO. In th...

Microbial fuel cells (MFCs) represent an emerging technology that focuses on power generation and effluent treatment. This review compiles articles related to MFCs using azo dye as the substrate. The significance of the general components in MFCs and systems of MFCs treating azo dye is depicted in this review. In addition, degradation of azo dyes such as Congo red, methyl orange, active brillia...

Azo dyes are one of the oldest industrially synthesized organic compounds characterized by presence of Azo bond (-N=N-) and are widely utilized as coloring agents in textile, leather, cosmetic, paint, plastic, paper, and food industries During textile processing, inefficiencies in dyeing result in large amounts of the dyestuff (varying from 2% loss when using basic dyes to a 50% loss when certa...

The properties of liquid-crystalline (LC) hybrid systems made of inorganic nanoparticles grafted with photosensitive azo compounds are presented. For materials with a large density of azo ligands at the surface, the LC structure can be reversibly melted by UV light, and the return to the LC state does not require the absorption of visible light. For systems with a lower density of azo ligands, ...

The primary azo compound 1-(3-formyl-4-hydroxyphenylazo)-4-nitrobenzene reacts with some aliphatic and aromatic diamines and yields the corresponding azo-azomethine compounds. These compounds were characterized by elemental analysis, IR, UV/Vis, and NMR spectroscopy. The primary azo compound exists entirely in the azo form in solution as well as in the solid phase. The tautomeric structure of a...

In recent decade, conjugated microporous polymers (CMPs) were treated as one of the superior porous materials for CO2 uptake. Herein, we prepared two azo-linked CMPs namely: azo-carbazole (Azo-Cz) and azo-phenothiazine (Azo-Tz) from reduction corresponding nitro monomers using sodium borohydride (NaBH4). The obtained well characterized many spectroscopic techniques. According to TGA BET analyse...

The selective one- and two-electron reduction of azo-pyridine and azo-1,8-naphthyridine with anionic CH3COO- by the Kolbe reaction has been established for the first time, and reaction mechanisms are presented.

A hydrophobic compound, which we name 3C18-Azo, containing an azo head and three 18 C alkyl chains has the capacity to form an amphiphile by capping it with a cyclodextrin (CD) by inclusion complexation. The amphiphilic compound self-assembles into vesicles in water. Optical switching of the assembly and disassembly is realized by alternating visible and UV irradiation, which causes the isomeri...