The drug making resreach has accentuated on extrusion technology for a long time. The advance of drug bioavailibility, bead manufacturing and granulation is assured by extrusion procedures. There are also diverse effects in resereches with respect to the use of process understanging as a tool in quality management. Many initiatives of FDA such as PAT and QBD are getting accepted. In this survey...

Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...

Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...

The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...

Effect of pretreatment by shotblasting to workpieces before lubricating a non-chemical conversion lubricant in cold forging was examined making several surfaces with different topographies, using wet shotblasting. Backward-cup extrusion test estimated the performance pretreatment. This provides extremely large surface expansion bring severe tribological conditions. After tests, insides cup-like...

Cold forging is widely used in many industries. Multi-stage cold forming usually utilized fasteners. In this study, numerical simulation and experimental investigations were carried out on a five-stage cold-forming process for the manufacturing of low-carbon steel AISI 1010 relief valve regulating nuts. The through five stages included preparation centering backward extrusion, extrusion over di...

Hot-melt extrusion is one of the most widely applied processing technologies in the plastic, rubber and food industry. Today this technology has found its place in the array of pharmaceutical manufacturing operations. Melt extrusion process are currently applied in the pharmaceutical field for the manufacture of a variety of dosage forms and formulations such as granules, pellets, tablets, supp...