Microalgae can be converted to an energy-dense bio-oil via pyrolysis; however, the relatively high nitrogen content of this bio-oil presents a challenge for its direct use as fuels. Therefore, hydrothermal pretreatment was employed to reduce the N content in Nannochloropsis oculata feedstock by removing proteins without requiring significant energy inputs. The effects of reaction conditions on ...

A bench-scale auger reactor was designed for use as a laboratory-scale fast pyrolyzer for producing bio-oil from Japanese cedar. An analytical pyrolysis method was performed simultaneously to determine the distribution of pyrolysis products. The pyrolysis temperature was found to have the greatest influence on the bio-oil characteristics; bio-oil yields increased as the pyrolysis temperature in...

The direct catalytic cracking of biomass pyrolysis vapor into aromatics derived from Douglas fir sawdust pellets was tested using an upfront microwave pyrolysis process coupled with a packed-bed catalysis process using a ZSM-5 Zeolite catalyst. A central composite experimental design (CCD) was used to optimize the bio-oil and syngas yields. The effects of temperature and inverse weight hourly s...

A techno-economic analysis was performed for a 100 dry-ton/day (90,719 kg/day) fast pyrolysis transportable plant. Renewable Oil International® LLC provided the life cycle cost of operating a 100 dryton/day fast pyrolysis system using southern pine wood chips as feedstock. Since data was not available from an actual large-scale plant, the study examined data obtained from an actual 15 dry-ton/d...

Fractions of waste square timber and waste ordinary plywood were pyrolyzed in a pyrolysis plant equipped with a fluidized bed reactor and a dual char separation system. The maximum bio-oil yield of about 65 wt.% was obtained at reaction temperatures of 450-500 °C for both feed materials. For quantitative analysis of bio-oil, the relative response factor (RRF) of each component was calculated us...

The major challenge for the pyrolytic conversion of lignocellulosic materials into crude bio-oil is the poor quality of the final product. Several strategies (addition of solvents, production of emulsions, and extraction with biodiesel) have been studied to improve its fuel properties. The extraction with biodiesel is an interesting solution because it allows direct utilization of some bio-oil ...

Excessive amount of oxygen content in unprocessed bio-oil deteriorates the quality of bio-oil which cannot be used in transportation vehicles without upgrading. Acetic acid (CH3COOH) is a vital component of ‘acids’ catalogue of unprocessed bio-oil produced from thermochemical conversions of most of biomass feedstocks such as switchgrass, alfalfa, etc. In this study, the decomposition reactions ...

*Correspondence: Ronghou Liu, Biomass Energy Engineering Research Centre, School of Agriculture and Biology, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240, China e-mail: [email protected] Different mass fractions (0, 3, 6, 9, 12, and 15%) of ethyl acetate were added to bio-oil for improving its storage stability during storage at 40°C for 35 days. For different bio-oils d...

This research thesis validates the potential of tall oil as a renewable feedstock for the production of base-chemicals, especially olefins, as conceived in the thermo-chemical bio-refinery concept. The focus was on the use of hydrotreating and steam cracking technologies with different tall oil feedstocks. Particular advances were accomplished in terms of technology development for high yield o...

thyme (thymus vulgaris l.) is perennial aromatic shrub belonging to the mint family which has anti-spasmodic, antiseptic, carminative, anti-cough, sputum and antioxidant properties. in order to study the effects of drought stress and bio-fertilizer on plant growth, essential oil yield and constituents of thyme plant, an experiment was conducted in a split plot based on randomized complete block...