Commercial, aluminum die-cast alloys are subject to long-term stresses leading to viscoelastic material responses resulting in inefficient engine operation and failure. Constant load creep tests were conducted on aluminum die-casting alloys: B-390, eutectic Al-Si and a 17% Si-Al alloys. Rupture occurred in the primary creep regime, with the eutectic alloy having the longest times to failure. Pr...

The effect of bismuth and calcium additions on the microstructural characteristics and the tensile properties of the modified and grain-refined Al-Si based B319 alloys were studied in this paper. Based on the results obtained, it has been concluded that Bi reacts with both Sr and Mg, leading to severe demodification of the eutectic Si at Bi levels of 0.15%-0.6% Bi. Bismuth causes a decrease of ...

Cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys, upon compressive creep deformation at 300–400 C, exhibit threshold stresses attributable to climb-controlled bypass of coherent Al3Zr and Al3(Zr1 xTix) precipitates. Al–0.1Zr–0.1Ti exhibits a smaller threshold stress than Al–0.1Zr, which is attributed principally to a reduced lattice parameter mismatch between the Al3(Zr1 xTix) precipitat...

Microstructure, precipitation hardening response, and mechanical and physical properties of Cu-Cr-Ag alloy and Cu-Cr-Ag-Ce alloy have been investigated using transmission electron microscopy, scanning electron microscope, optical microscope, electrical conductivity analysis, and tensile test. The influence of element Ce on the matrix refinement, impurity removal, and precipitation in the Cu-Cr-...

in this study, the effects of forming method (extrusion) and environmental factors (solution ph and temperature) on the corrosion performance of az91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (eis), scanning electron microscopy (sem) and salt spray techniques. the polarization test results of the specimens showed that simple sh...

Binary titanium alloys with the beta-stabilizing elements of Co, Cr, Cu, Fe, Mn and Pd (up to 30%) and Ag (up to 45%) were examined through metallographic observation and X-ray diffractometry to determine whether beta phases that are advantageous for dental use could be retained. Corrosion behavior was also investigated electrochemically and discussed thermodynamically. Some cast alloys with Co...

Ternary Mg–Y–Zn alloys have attracted considerable attention due to their excellent mechanical properties and unique microstructures. Microstructural variation and the resulting mechanical properties can be affected by various processing routes, particularly those involving severe plastic deformation of a cast billet. The following approach was used in this work to perform a comparative study: ...

Metals and metallic alloys are unavoidable materials in everyday dental use for the making of fillings, cast cores and post systems, individual crowns, implantants’ suprastructures, dentures and orthodontic devices. They still belong to the vital materials in dentistry. Applied alloys in a mouth are exposed to the influence of chemical, biological, mechanical, thermal and electrical forces whic...