The incorporation of graphene-based nanodispersoids in ceramic coatings is known to enhance the wear behavior these materials. In this study, for first time, alumina/graphene nanoplatelets (GNPs) were deposited through Suspension High Velocity Oxy-Fuel (SHVOF) thermal spray on Al2O3/TiC substrate composites, which laser microtextured with grid and line surface patterns. Dense around 8?10 ?m thi...

This study examines the hot corrosion behaviour of plasma-coated T12 steel for 10 cycles 100 h each in an industrial boiler. The coating contains CNT (carbon nanotubes) reinforced alumina-titania powders. substrates were exposed to boiler at 750 °C. A thermogravimetric examination was conducted evaluate kinetics corrosion. Corroded samples examined with scanning electron microscopy and x-ray di...

Background: Titanium (Ti) implants are commonly coated with hydroxyapatite (HA). However, HA has some disadvantages such as brittleness, low tensile strength and fracture toughness. It is desirable to combine the excellent mechanical properties of ZrO2 and the chemical inertness of Al2O3 with respect to the purpose of this project which was coating Ti implants with HA-ZrO2-Al2O3 to modify the s...

In this study porous alumina samples were prepared and then coated using the biomimetic coating technique using a five times Simulated Body Fluid (5.0SBF) as the growth solution. A coating was achieved after pre-treatment with concentrated acid. From elemental analysis, the coating contained calcium and phosphorous, but also sodium and chlorine. Halite was identified by XRD, a sodium chloride p...

We dedicate this work to Wolfgang Pompe, a very good friend and a good friend of the Materials Faculty at UCSB where he and his wife, Gisela, shared their lives and fellowship. Three different zirconia–alumina laminates, AZ50, AZ80, and AZ95, were fabricated via tape-casting thick Zr(3Y)O2 layers, dip-coating the zirconia tapes in a slurry containing a mixture of zirconia and alumina, stacking ...

OBJECTIVE To evaluate the bond stability of resin cements when luted to glass-reinforced alumina and zirconia CAD/CAM dental ceramics. STUDY DESIGN Eighteen glass-infiltrated alumina and eighteen densely sintered zirconia blocks were randomly conditioned as follows: Group 1: No treatment; Group 2: Sandblasting (125 µm Al₂O₃-particles); and Group 3: Silica-coating (50 µm silica-modified Al₂O₃-...

We propose a high-thermal-conductivity infrared filter using alumina for millimeter-wave detection systems. We constructed a prototype two-layer antireflection-coated alumina filter with a diameter of 100 mm and a thickness of 2 mm and characterized its thermal and optical properties. The transmittance of this filter at 95 and 150 GHz is 97% and 95%, respectively, while the estimated 3 dB cut-o...