In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...

Failure in cold-formed steel beams is generally initiated by one of three instabilities: local, distortional, or lateral-torsional buckling. For cold-formed steel joists, purlins, or girts, when the compression flange is not restrained by attachment to sheathing or paneling, distortional buckling may be the predominant failure mode. Experimental results on cold-formed steel beams with unrestrai...

Usage of cold formed steel structural components for buildings and structures is gaining popularity in India for a decade. Hot rolled steel member behaviour and design are well developed, whereas the cold formed steel member behaviour and design is not developed fully compared to the rest of the world. The Indian code for cold-formed steel design, IS 801 was revised during 1975, which is in lin...

This paper presents a finite element analysis on the tensile stiffness of steel bolted connections, which are fabricated from thin-walled cold-formed steel strips and members. This type of bolted connection is usually used to assemble the diagonal bracing member in the light steel structure. Unlike the architectural steel structure, thin walled steel bolted connection cannot be simplified into ...

This research effort focuses on the evaluation of existing design standards for cold-formed steel stud walls and the development of retrofit wall systems. Full-scale wall systems are tested under uniform static pressure using a vacuum chamber. The resistance functions obtained are used to model the dynamic behavior of the walls and to predict performance under blast conditions. This paper focus...

Steel housing solutions made of thin-walled cold-formed profiles (CFS) appear to be very competitive in seismic areas due their lightweight and the associated reduced mass. This non-negligible advantage with costs ease erection popular this type building solution. Aimed at investigating potential these structural systems, recent years, several extensive studies lateral response shear walls were...

Over the last decade, use of cold-formed steel (CFS) sections has increased significantly increasing in lightweight buildings and many other industrial constructions worldwide. The present research paper aims to investigate distributed load capacity CFS buildings. Three built-up were investigated for column three girder a frame building study case. Channels, channels with lip, sigma section, ho...

Desert sand foamed concrete (DSFC), which offers advantages, such as fire resistance, sound insulation, construction convenience, and environmental benefits, has not been used in cold-formed steel (CFS) composite floors. In this study, four full-scale specimens were designed tested under four-point bending to investigate the effect of filling holes. The load–deflection curves strain distributio...