نتایج جستجو برای: cold rolling
تعداد نتایج: 122769 فیلتر نتایج به سال:
In this study, the effects cold rolling and annealing parameters during thermomechanical processing of the AISI 201LN stainless steel were investigated. The cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. Unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °C was carried out to...
بررسی تجربی و عددی پارامترهای مختلف نورد هدف تعریف این پروژه می باشد. نتایج تجربی با استفاده از نتایج تجربی بر گرفته از مقالات معتبر و یا آزمایشات انجام گرفته بر روی دستگاه نورد ساخته شده در دانشگاه علم و صنعت استخراج شده است. نتایج عددی جهت اعتبار بخشی نتایج تجربی نیز با شبیه سازی فرآیند نورد در نرم افزار abaqus بدست آمده است. در بخش اول کار اثر کاهش ضخامت های کم بر نیروی نورد مورد بررسی قرار...
The objectives in the cold rolling process include improved sheet surface quality, enhanced steel mechanical strength, and better solidification operations. Given the increasing demand for higher steel...
In this work, the influence of crystallographic texture on mechanical properties was investigated by X-ray diffraction in the superelastic Ti-24Nb-4Zr-8Sn alloy. Different textures were obtained by changing the cold rolling reduction rate and the following thermal treatment (solution treatment or flash thermal treatment). The tensile tests performed show that Young’s modulus, elongation at rupt...
Cold-rolled sheet metal that is often used in laser forming exhibits anisotropic properties, which are mostly caused by preferred orientations of grains developed during the severe plastic deformation such as cold rolling. In the present study, the textures of cold-rolled mild steel sheets are characterized and the influence of the plastic anisotropy on laser forming process is investigated. De...
A. Volodarskaja, V. Vodárek, J. Holešinský, VŠB Technical University of Ostrava, FMME, Ostrava, Czech Republic. Š. Miklušová, O. Žáček. ArcelorMittal Frýdek-Místek, Frýdek-Místek, Czech Republic The final Goss texture in grain-oriented electrical steels (GOES) is affected by microstructure evolution and inheritance during the whole production process. This paper presents the results of detailed...
the full annealing aa6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ecap) and cold rolling (cr) in order torefine its microstructure and to improve its mechanical properties. according to the results of hotand cold tensile tests, the combination of ecap and cr significantly affected the final strengthand ductility of studied...
the mechanical properties and microstructural developments of 321 stainless steel during thermomechanicalprocess were investigated. the repetitive cold rolling and subsequent annealing wereconducted to achieve nanocrystalline structure in an aisi 321 stainless steel. heavily cold rolling at−20°c was conducted to form martensite in metastable austenitic steel. the process was followed byannealin...
Self-propagating exothermic formation reactions have been intensively studied in a variety of reactive multilayer foils, such as Ni/Al, Ni/Si, and Nb/Si foils. These foils contain numerous alternating nanoscale layers of elements with large negative heats of mixing. With a small thermal pulse, atoms diffuse normal to the layering and result in a rapid exothermic reaction. The heat produced is c...
The full annealing AA6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ECAP) and cold rolling (CR) in order torefine its microstructure and to improve its mechanical properties. According to the results of hotand cold tensile tests, the combination of ECAP and CR significantly affected the final strengthand ductility of studied...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید