This work is carried out to investigate combustion characteristics of a dual fuel (diesel-gas) engine at part loads, using a quasi-dimensional multi zone combustion model (MZCM) for the combustion of diesel fuel and a single zone model with detailed chemical kinetics for the combustion of natural gas fuel. Chemical kinetic mechanisms consist of 184 reactions with 50 species. This combustion mod...

The combustion and emission characteristics of ethyl levulinate (EL)– diesel blended fuels were investigated using engine bench tests. Blended fuels properties, including the kinematic viscosity (KV), density, EL proportions, oxygen content, cetane number (CN), and lower heating value (LHV) were considered. The combustion and emission characteristics of brake-specific fuel consumption (BSFC), a...

The dual fuel engines at part loads inevitably suffer from lower thermal efficiency and higher carbon monoxide and unburned fuel emission. This work is carried out to investigate combustion characteristics of a dual fuel (dieselgas) engine at part loads, using a single zone combustion model with detailed chemical kinetics for combustion of natural gas fuel. The authors developed software in ...

This paper presents a concise overview of ash deposition in combustion or co-firing of biomass (woody biomass, agricultural residues, peat, etc.) with other fuels for power/heat generation. In this article, the following five research aspects on biomass combustion ash deposition are reviewed and discussed: influence of biomass fuel characteristics, deposit-related challenges, ash deposition mon...

The combustion in biomass boilers is classified as a non-homogeneous combustion process. This phenomenon is known as difficulty controllable by common control algorithms due to its inappropriate properties e.g. non-linear static characteristics, limitation of control variable quantity, transitions with a time delay or even behavior similar to non-minimal phase systems. Due to these properties t...

A theoretical study analyzing three-dimensional combustion acoustic instabilities in a liquid propellant rocket engine combustor has been conducted. A linear theory based on Crocco’s pressure sensitive time lag model is used. To apply this theory the combustor is divided into two main components, including the combustion chamber and the converging part of the nozzle. The assumption of concentra...

homogenous charge compression ignition (hcci) combustion is spontaneous multi-site combustion of a nominally premixed air/fuel mixture that exhibits high rate of pressure rise and short combustion duration. to avoid excessive pressure rise rate and knocking, hcci engines are fueled with highly diluted mixture using a combination of excess air and/or egr. hcci combustion is attractive due to ext...