Carbon dioxide (CO2) emitted from conventional coal-based power plants is a growing concern for the environment. Chemical looping combustion (CLC), pre-combustion and oxy-fuel combustion are promising CO2 capture technologies which allow clean electricity generation from coal in an integrated gasification combined cycle (IGCC) power plant. This work compares the characteristics of the above thr...

In this paper, a combustion analysis of a compression ignition (CI) engine operating with biodiesel blends has been experimentally investigated to examine the effects of biodiesel on the combustion process and the characteristics of the engine noise produced by the combustion process. The experiment with different loads and speeds was conducted on a four-cylinder, four-stroke, direct injection ...

In this work, the thermal behavior of rice husk, sewage sludge, and their blends during combustion processes was investigated by means of thermogravimetric analysis (TGA), and the slagging characteristics were studied through X-ray fluorescence (XRF) and melting temperature. The effects of the proportion of rice husk and sewage sludge blends on the combustion process, ignition and burnout chara...

the dried nitrate-urea gels exhibit the combination of autoicatatric combustion behavior and ultrasonic, whichcan be used to synthesize the nanocatalyst ferrite powders. cu and ni unites nanocatalyst powders sithcomposition of caned], and nife204 were synthesized by a sol-gel auto catalnic combustion process. themolar ratio between metal ions and urea was 11.2. the sob gel process was done at 8...

Problem statement. The analysis of fire hazard shows that fires cause significant material damage to the economy around world, significantly complicating environmental situation, endangering human life. Thus, in Ukraine there are more than 50 thousand every year, which people die, and exceeds hundreds millions hryvnias, incidental losses 20 times greater. This alarming statistics is largely due...

Abstract: Auto-ignited gel combustion process has been used for producing a red hematite-zircon based pigment. The combustible mixtures contained the metal nitrates and citric acid as oxidizers and fuel, respectively. Sodium silicate (water glass) was used as silica source for producing zircon phase. X-Ray Diffractometery, Electron Microscopy and Simultaneous Thermal Analysis were used for ...

This work presents the application of three different timefrequency methods to pressure and structure-borne sound signals to improve combustion diagnosis of internal combustion engines. Increasing engine efficiency and reduction of pollutants imply enhanced knowledge of the combustion process. The methods presented deepen the understanding of the measured signal and stimulate improved algorithm...

Measures such as improved process design, operation, maintenance, housekeeping, and other management practices can reduce emissions. By improving combustion efficiency, the amount of products of incomplete combustion (PICs), a component of particulate matter, can be significantly reduced. Proper fuel-firing practices and combustion zone configuration, along with an adequate amount of excess air...

This paper presents a sensor fault detection and diagnosis approach for industrial combustion processes. Clustering algorithms are applied to the measurements of controllable process variables involved in single-input-single-output feedback control loops. Current data points from the process are compared with the clusters to identify sensor faults. Once the measurements of controllable process ...

The effort of many manufacturers of heat sources is to achieve the maximum efficiency of energy transformation chemically bound in the fuel to heat. Therefore, it is necessary to streamline the combustion process and minimize the formation of emission during combustion. The paper presents an analysis of the combustion air temperature to the heat performance and emission parameters of burning bi...