The purpose of this study was to evaluate the effect of a resin coating technique on the microtensile bond strength (microTBS) of resin cement to dentin in composite crown restorations. Crown preparations were done on human molars. A resin coating material, Hybrid Bond, was immediately applied to the prepared dentin and light-cured, while the tooth without resin coating acted as the control. An...

The purpose of the present study is to evaluate the fracture load of composite-based repairs to fractured zirconium oxide (Z) crowns and to ceramic-fused-to-metal (CM) crowns, comparing different mechanical surface preparation methods. A total of 75 crowns were repaired; samples then underwent dynamic loading and thermocycling. Final fracture load values for failure of the repaired crowns were ...

Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...

Inflammatory reaction and thrombosis are the unsolved main problems of non-coated biomaterials applied in cardiac surgery. In the present study, a series of sustained composite coating was prepared and characterized, such as in the chemical modification of polyvinyl chloride (PVC) for applications in cardiac surgery and the assessment of the biological property of modified PVC. The composite co...

A Cr13Ni5Si2-based composite coating was successfully deposited on copper by pulse laser induction hybrid cladding (PLIC), and its high-temperature wear behavior was investigated. Temperature evolutions associated with crack behaviors in PLIC were analyzed and compared with pulse laser cladding (PLC) using the finite element method. The microstructure and present phases were analyzed using scan...

a fiber coating from polyaniline (pani) was electrochemically prepared and employed for solid phase micreoextraction (spme). the pani film was directly electrodeposited on the platinum wire surface using cyclic voltametry (cv) technique. the same method was applied for the preparation of spme fiber coated by polyaniline multiwalled carbon nanotubes (pani/mwcnts) composite. the concentration of ...

In this study, a TiC-reinforced composite coating was produced to improve the wear resistance of a pearlite matrix grey iron using a pre-placed Ti powder by laser cladding. Results of scanning electron microscopy (SEM), X-ray diffractometer (XRD), and energy dispersive X-ray spectroscopy (EDS) confirmed that the coating was composed of TiC particles and two kinds of α-Fe phase. The fine TiC par...

Due to the medium and small damping characteristics of the hard coating compared with viscoelastic materials, the classical modal strain energy (CMSE) method cannot be applied to the prediction of damping characteristics of hard-coating composite structure directly. In this study, the CMSE method was modified in order to be suitable for this calculation, and then the damping optimization of the...