Cylindrical concrete cores of 10 cm diameter and height were taken from the columns and shear walls of randomly chosen 5-40 years old reinforced concrete (RC) buildings located in different towns of Istanbul and Izmit (Kocaeli) in Turkey from 2000 to date. The ultrasonic pulse velocity (UPV) measurements and uniaxial compressive strength (UCS) tests were conducted on 200 concrete core specimens...

Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...

This study carried out comparative seismic performance of reinforced concrete frames infilled by masonry walls with different heights. Partial and fully infilled reinforced concrete frames were modeled for the research objectives and the analysis model for a bare reinforced concrete frame was also established for comparison. Non–linear static analyses for the studied frames were performed to in...

Quasi-static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For slender RC walls that form a stable flexural mechanism, the ratio of shear to flexural deformations remains approximately constant over the entire range of imposed displacement ductiliti...

Plastic concrete consists of aggregates, cement, water and bentonite, mixed at a high water cement ratio, to produce a ductile material. It is used for creating an impermeable barrier (cut-off wall) for containment of contaminated sites or seepage control in highly permeable dam foundations. The effects of water to binder ratio and clay dosage on mechanical properties of plastic concrete were i...