design and optimization of a single crystalline silicon (c-si) solar cell is performed to achieve the maximum light conversion efficiency. various parameters such as doping concentration and thicknesses, and geometrical dimension of surface pyramids are studied. the inverted surface pyramid is used to increase the efficiency of the solar cell, and engineered oxide layer is used as the passivati...

one of the most important factors that affect tire friction is surface roughness, which determines the size of the real contact area, real pressure distribution on the contact interface, and scales of mechanical engagement between viscoelastic rubber and a rough substrate. the need to predict coefficient of friction (cof) for rubber on rough surfaces for applications such as traction of tires o...

coeffcient of  friction  (cof)  for  rubber parts  is one of  the key parameters in their interaction with solid rough surfaces (micrometer to millimeter scales),  such  as  tire-road  interactions. cof  of  rubber  depends  on  viscoelastic properties of rubber, roughness characteristics of the counter-part surface, and process variables such as contact nominal pressure and sliding speed. due ...

Tungsten chemical-mechanical polished integrated circuits were used to study the alignment and immobilization of mammalian (Vero) cells. These devices consist of blanket silicon oxide thin films embedded with micro- and nano-meter scale tungsten metal line structures on the surface. The final surfaces are extremely flat and smooth across the entire substrate, with a roughness in the order of na...

Silica nanotubes have been extensively applied in the biomedical field. However, very little attention has been paid to the fabrication and application of micropatterned silica nanotubes. In the present study, microgrooved silica nanotube membranes were fabricated in situ by microgrooving silica-coated collagen hybrid fibril hydrogels in a Teflon microfluidic chip followed by calcination for re...

The paper examines the influence of initial surface roughness and sliding speed on friction wear behavior AA6061 aluminum alloy brass (CuZn37Pb2) under dry contact using a CSM tribometer. Surface materials studied were measured optical profilometer. Rough surfaces (Ra=0.37 - 1.33 μm) prepared two materials: CuZn37Pb2 alloy. Track width, rate, loss values assessed contrasted with changes in coef...

The contact-angle (CA) hysteresis generated by the difference between advancing and receding CAs of a droplet on an inclined surface generates adhesion force that can hold surface. Similarly, CA wettability dividing line (WDL) superhydrophobic superhydrophilic regions improve anti-shear stability bubbles in water, with maximum range more than 150° for CAs. Based this mechanism, influence WDL gr...

A microfiber is used as a laser-focusing unit to fabricate a groove structure on TiAlSiN surfaces. After one laser pulse etching, a groove with the minimum width of 265 nm is manufactured at the area. This technique of microfabricating the groove in microscale is studied. Based on the near-field intensity enhancement at the contact area between the fiber and the surface during the laser irradia...