The medical device industry is still seeking answers to the mechanically-assisted corrosion (MAC) problem, which becomes increasingly important due to modularity in design. MAC manifests in various forms, some of which are fretting corrosion, crevice corrosion and stress corrosion. Several studies have been conducted to understand the causes and the factors that affect fretting corrosion. Some ...

a new anti-corrosion compound, melamine formaldehyde (mf), was formulated by the addition of proper amount of formaldehyde to melamine under specific conditions. this compound was mixed with a novel nano powder, which was extracted from corn cob ash containing sio2 particles, in order to improve its corrosion inhibition efficiency. this inhibitor provides a high level of protection for steel su...

The purpose of this study was to compare the known behavior of hydrogen embrittled high-strength steel to the characteristics of environmentallyinduced stress corrosion failure where hydrogen is continuously generated at the specimen surface. The incubation time for the initiation of slow crack growth was accelerated by prestressing for a fixed time below the lower critical limit. These results...

The microstructure, mechanical properties, and corrosion behavior of binary Ti-xPt alloys containing 5, 10, 15 and 20 wt% Pt were investigated in order to develop new Ti-based dental materials possessing superior properties than those of commercially pure titanium (cp-Ti). All of the Ti-xPt (x = 5, 10, 15, 20) alloys showed hexagonal α-Ti structure with cubic Ti₃Pt intermetallic phase. The mech...

magnesium alloys as biodegradable materials can be used in body as an implant materials but since they have poor corrosion resistance, it is required to decrease their corrosion rate by biocompatible coatings. in this study, hydroxyapatite (ha) coatings in the presence of an intermediate layer of zrn as a biocompatible material, deposited on az91 magnesium alloy by ion beam sputtering method at...

the aisi 316 l stainless steel (ss) specimens were exposed to passivation surface through two different processes including; holding in 40-vol% hno3 at temperature of 60 ºc for 30 min and 15-vol%h2so4 at ambient temperature for 1 hour. the corrosion behavior of specimens was evaluated in physiological solutions by electrochemical in vitro tests through linear and tafel polarization tests. cycli...

The aim of this study was to investigate the effects of Hf content and immersion time on the electrochemical corrosion behavior of the Ti-22Nb-xHf (x1⁄4 0, 2, 4, and 6 at%) alloy samples in 0.9%NaCl solution at 37 8C and neutral pH range, utilizing the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. From the polarization curves, all these alloys exhibit...

An overview is given of the anomalous behavior of some metals, in particular Fe and Cr, in acidic aqueous solutions during anodic dissolution. The anomaly is recognizable by the fact that during anodic dissolution more material dissolves than would be expected from the Faraday law with the use of the expected valence of the formed ions. Mechanical disintegration, gas bubble blocking, hydrogen e...