The crack developing depth is a key problem to slope stability of the expansive soil and its project governance and the crack appears under the roles of dry-wet cycle and gradually develops. It is believed from the analysis that, because of its own cohesion, the expansive soil will have a certain amount of deformation under pulling stress but without cracks. The soil body will crack only when t...

Measurement of fracture parameters for a rapidly growing crack in syntactic foam sheets using image correlation technique and high-speed photography is presented. The performance of a rotating mirror-type multi-channel high-speed digital camera to measure transient deformations is assessed by conducting benchmark tests on image intensity variability, rigid translation and rigid rotation. Edge-c...

Crack assessment is an essential process in the maintenance of concrete structures. In general, concrete cracks are inspected by manual visual observation of the surface, which is intrinsically subjective as it depends on the experience of inspectors. Further, it is time-consuming, expensive, and often unsafe when inaccessible structural members are to be assessed. Unmanned aerial vehicle (UAV)...

Newly developed stress increment measurement technique is presented. Based on stress inversion theory proposed by authors, spontaneous stress increment field can be obtained even if the material is under plastic deformation. We present here an application example of this technique by means of the stress increment field measurement at the crack tip of an aluminum plate under the monotonic loadin...

The high-cycle, push-pull fatigue fracture behavior of high-C, Si-Al-rich nanostructured bainitic steel was studied through the measurement of fatigue limits, a morphology examination and phase composition analysis of the fatigue fracture surface, as well as fractography of the fatigue crack propagation. The results demonstrated that the push-pull fatigue limits at 10⁷ cycles were estimated as ...

Monitoring fatigue cracking of large engineering structures is a costly and time-intensive process. The authors’ present the first low-cost inkjet-printed patch antenna sensor that can passively detect crack formation, orientation and shape by means of resonant frequency shifts in the two resonant modes of the antenna. For the first time, the effect of non-linear crack shapes on the parallel an...

Managing pipe damaged by Stress Corrosion Cracking (SCC) has been a formidable challenge to the pipeline industry. The development of a practical solution for the measurement and evaluation of SCC has been marred by the complexity of crack shapes, their distribution within a crack colony, and the lack of non-destructive technology capable of reliably measuring the crack depths. Laser ultrasonic...

Debonding of films attached to substrates as well as fibers embedded in matrices typically involves initiation, steady-state propagation and a final transient as the debond converges on an edge or another debond. The emphasis in this paper is on the mechanics of the transient. Under most circumstances, a converging debond crack is characterized by an energy release rate that approaches zero, ca...

Blasting complaints are consuming an increasing amount of time and resources. This worsening situation has spawned new methods for relaying the public’s concerns. The direct measurement of crack response to both long term environmental and blast vibration effects with the same sensor exemplifies one new approach, which can be helpful in the process of educating quarry neighbors about the large ...