in this study, the elemental powders of aluminum and copper were initially subjected to mechanical alloying using an attrition ball mill under argon atmosphere to produce an al-4.5 wt% cu powder alloy. the wc nanoparticles were then added to the powder alloy and milled in a planetary ball mill to explore the role of the wc nanoparticles on the mechanical properties of the fabricated composite p...

The Si-coated SiC (Si-SiC) composite nanoparticle was prepared by non-transferred arc thermal plasma processing of solid-state synthesized SiC powder and was used as a sintering additive for SiC ceramic formation. Sintered SiC pellet was prepared by spark plasma sintering (SPS) process, and the effect of nano-sized Si-SiC composite particles on the sintering behavior of micron-sized SiC powder ...

silica exists in rice husk, an agriculture waste, as a naturally occurring phase. in first step, acidic pre-treatment and calcination of the rice husk were performed to obtain nano-silica, in which various sizes of the nano-silica, totally with sizes under 80 nm, were achieved. second, to reduce nano-silica to elemental si and subsequently formation of the composite, mg used as the reducing age...

Microstructural and electrical properties of Cu-chromium alloy (Cu-Cr) dispersed with vapor-grown carbon fiber (VGCF) prepared by powder metallurgy (P/M) process have been investigated. Cu-0.7 mass% Cr pre-alloyed powder (Cu-Cr) made by water atomization process was used as raw materials, which contained solid solute Cr elements in Cu matrix. The alloy powder coated with un-bundled VGCF by usin...

The purpose of this study was the investigation of the removal of phenol with nanoparticles zero valent iron and iron powder. The effect of various parameters such as initial concentration, pH, contact time, and dosage of NZVI and Fe powder was examined, and a Central Composite Design (CCD) was then applied to appraisal the effect of these variables. The chemical and physical characteristic...

Abstract: In this paper‚ the physical and mechanical properties of Al nanocomposite reinforced with CNTs wereinvestigated. High purity Al powder and Carbon Nanotubes (CNTs) with different percentage were mixed by ballmilling method and the composite was fabricated by cold pressing followed by sintering technique. The variation ofdensity and hardness of composite with CNTcontent was investigated...

in this study, al/gr composites with 5,10,15,20 weight percent of graphite were produced by in-situ powder metallurgy method. the produced powder mixtures were consolidated and sintered at optimum conditions. the resultant composites were solution treated at 495?c and aged at 170?c. the influence of graphite content on the bending strength of composites was studied. the distribution of graphite...

While preparing the composite preform in the powder metallurgy Lab, the various defects due to porosity, open crack and residual stresses are possible. This may lead to poor life and strength of materials. It is difficult to predict the defects in the form of pores physically in the powder metallurgy Lab. To simplify this kind of problem, the Scanning Electron Microscope (SEM) images are genera...

magnesium and its alloys are light, biodegradable, biocompatible metals that have promising applications as biomaterials. magnesium is potentially useful for orthopedic and cardiovascular applications. however, the corrosion rate of this metal is so high that its degradation occurs before the end of the healing process. one of the ways to improve the corrosion rate is to compose it’s with ceram...