With advancements in VLSI fabrication technology, interconnecting wires are being placed in closer proximity while circuits are starting to operate at higher frequencies. Thus, reduction in crosstalk between interconnects becomes an important consideration for VLSI physical design. In this paper, we have reviewed the effects and impact that crosstalk has on the performance and reliability of VL...

The analysis of crosstalk between ports of integrated balanced mixers is difficult because the circuit is strongly nonlinear and the crosstalk depends on information which, if it is known at all, is not always provided by the foundry. This paper presents a general method for calculating mixer crosstalk. Device measurements are combined with periodic small-signal analysis to yield the crosstalk ...

The need for faster circuits in smaller area with lower power dissipation has made it a common practice to use the domino CMOS in high performance integrated circuits. However this improved performance comes at the cost of lower noise immunity. Also current trends in integrated circuit technology have increased chances of crosstalk due to capacitive coupling. Though several works have investiga...

Optical network-on-chip (ONoC) has been proposed to provide higher bandwidth and lower power consumption for future multicore systems. However, due to the intrinsic characteristic of optical devices, crosstalk noise is a potential issue for ONoC. The traditional routing algorithms for Benes ONoC have not considered the aspect of crosstalk. In this paper, we build the crosstalk model of the opti...

The detectors of Suprime-Cam were replaced in 2008/07 to full-depleted back illuminated CCDs [1]. The new CCDs show a crosstalk features between channels (Figure 1 top). Such crosstalk was reported in multichannel CCDs in other observatories [2,3,4,5,6]. In Suprime-Cam, one of the three crosstalk shadows moves parallel to the source. Default dithering sequence of Suprime-Cam does not change the...

Electrogoniometers are prone to crosstalk errors related to endblocks rotation (general crosstalk) and to the characteristics of each sensor (individual crosstalk). The aim of this study was to assess the crosstalk errors due to endblock misalignments and to propose a procedure to compensate for these errors in knee applications. A precision jig was used to simulate pure ± 100° flexion/extensio...

Metazoan signalling networks are complex, with extensive crosstalk between pathways. It is unclear what pressures drove the evolution of this architecture. We explore the hypothesis that crosstalk allows different cell types, each expressing a specific subset of signalling proteins, to activate different outputs when faced with the same inputs, responding differently to the same environment. We...

Crosstalk analysis has become a significant part of the design cycle of high performance processors in nanometer technologies. In this paper we demonstrate that current crosstalk analysis techniques that ignore the degrading effect of multiple crosstalk events on receiver noise rejection curve filter significant number of true violations. We also demonstrate that techniques that take into accou...

The effect of increasing inter-channel crosstalk in multichannel reproduction is investigated with auditory model simulations. A standard auditory model is used to estimate the perceptions of listeners in multichannel listening with crosstalk. ITD and ILD cue values are computed for three different loudspeaker setups. The crosstalk is varied between -14 dB and -38 dB. The results show that when...

Capacitive and inductive crosstalk noises are expected to be more serious in advanced technologies. However, capacitive and inductive crosstalk noises in the future have not been concurrently and sufficiently discussed quantitatively, though capacitive crosstalk noise has been intensively studied solely as a primary factor of interconnect delay variation. This paper quantitatively predicts the ...