We analyze coupled flexural vibration of two elastically and electrically connected piezoelectric beams near resonance for converting mechanical vibration energy to electrical energy. Each beam is a so-called piezoelectric bimorph with two layers of piezoelectrics. The 1D equations for bending of piezoelectric beams are used for a theoretical analysis. An exact analytical solution to the beam e...

The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm × 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20-200 μm and piezoelectric layers of single crystalline langatate material or lead zirconate t...

Piezoelectric films of poly(vinylidene fluoride) (PVDF) were prepared by casting and spin coating on silicon and glass substrates. The effect of the drying temperature and the post-annealing temperature on the film morphology was studied with optical microscopy. It was chosen the optimal combination of deposition conditions, regarding the wetting of the substrate surfaces, uniformity of the pro...

This paper deals with the bending of layered piezoelectric beams (multimorphs) subjected to arbitrary electrical and mechanical loading. Weinberg [1] obtaind a closed-form solution to this problem using Euler–Bernoulli beam theory and integrated equilibrium equations. In his analysis, Weinberg assumes that the electric field is constant through the thickness of the piezoelectric layers. This ap...

The origin of the functional properties of complex oxide superlattices can be resolved using time-resolved synchrotron x-ray diffraction into contributions from the component layers making up the repeating unit. The CaTiO3 layers of a CaTiO3/BaTiO3 superlattice have a piezoelectric response to an applied electric field, consistent with a large continuous polarization throughout the superlattice...

Series-connected thin film piezoelectric elements can generate large output voltages. The output voltage ideally is proportional to the number of connections. However, parasitic capacitances formed by the insulation layers and derived from peripheral circuitry degrade the output voltage. Conventional circuit models are not suitable for predicting the influence of the parasitic capacitance. Ther...

We have calculated the piezoelectric field and charge distribution for various III-nitride heterostructures. Our calculations include strain energy minimization and doping effects, and are presented to show the magnitude of piezoelectric effects in strained layers. We compare our calculated results to device results where available. These include the two-dimensional electron gas in heterojuncti...

Systems of planar electrodes arranged on dielectric or piezoelectric layers are applied in numerous sensors and transducers. In this paper electrostatics of such electrode systems is presented and exploited in the analysis of distributed piezoelectric transducer dedicated to surface elastometry of biological tissues characterized by large Poisson modulus. The fundamental Matlab R © code for ana...

In this paper microsensing elements with thin piezoelectric films are presented. Three different materials from the basic types – ceramic, metal oxide and polymer, in microsystems for environment parameters control are used. Zinc oxide (ZnO) and lead zirconium titanate (PZT) by sputtering technology from hot targets are deposited. The optimal parameters of the process and thickness of the layer...

molybdenum and tungsten dichalcogenides, some of which have been predicted to have larger piezoelectric coefficients than MoS2 (ref. 3). Piezoelectricity has been reported in few-layer C3N4 nanosheets7. Future work may involve the study of higher-order electromechanical effects in few-layer materials that have potential to generate curvature in membranes5. The atomically thin nature of these ma...