Red mud is a highly alkaline (pH >12) waste product from bauxite ore processing. The red mud spill at Ajka, Hungary, in 2010 released 1 million m(3) of caustic red mud into the surrounding area with devastating results. Aerobic and anaerobic batch experiments and solid phase extraction techniques were used to assess the impact of red mud addition on the mobility of Cu and Ni in soils from near ...

The present work is concerned with sulfidation of Cu, Zn and Ni containing plating wastewater with CaS. The sulfidation experiments were carried out at a room temperature by adding solid CaS to simulated metal solution containing either single-metal of Ni, Zn and Cu, or Ni-Zn-Cu mixture. At first, the experiments were conducted without pH adjustment and it was found that the complete sulfidatio...

Ni-Co duplex coatings were cladded onto Cu to improve the antiwear properties of Cu products. Prior to laser cladding, n-Al₂O₃/Ni layers were introduced as interlayers between laser cladding coatings and Cu substrates to improve the laser absorptivity of these substrates and ensure defect-free laser cladding coatings. The structure and morphology of the coatings were characterized by scanning e...

Microstructure, wetting behavior and interfacial reactions between Sn–0.7Cu and Sn–0.3Ag–0.7Cu (SAC0307) solders solidified on Ni coated Al substrates were compared and investigated. Microstructure of Sn–0.7Cu alloy exhibited a eutectic matrix composed of primary β-Sn dendrites with a fine dispersion of Cu6Sn5 intermetallics whereas microstructure of SAC0307 alloy exhibited coarser Cu6Sn5 and f...

Heavy metal concentrations in sediment collected from Dumai coastal waters have been studied by using sequential extraction technique to determine the distribution and geochemical speciation (EFLE, acid reducible, oxidisable organic and resistant) of Cd, Cu and Ni. The results showed that the highest concentrations of total Cd was in Cargo Port area and the lowest in Penyembal, whilst for Cu an...

Bagasse as a real biomass was converted to hydrogen rich gas via catalytic supercritical water gasification process. To find the effect of Cu on selectivity of products, Cu promoted Ni-γAl2O3 catalysts were prepared with 1 to 20wt% Ni and 0.5 to 10wt% Cu loadings via impregnation method. Catalysts were characterized by ICP, BET, XRD, H2 chemisorption and TEM technique as well CHNS analysis was ...

The formation and growth process of precipitates in Cu-Ni-Si alloys during aging were investigated by anomalous small angle scattering (ASAXS) and X-ray absorption fine structure (XAFS). ä-Ni2Si precipitates with wide nanometer size distribution were formed in the Cu-Ni-Si alloys after a long aging time of 10 s. However, the addition of a small amount of Fe appears to reduce the wide-size distr...

ni-co/cu multilayers have been grown by electrodeposition method from a single electrolyte (based on ni(so4).6h2o, co(so4).7h2o, cu(so4) and h3bo3) using galvanostatic control on titanium sublayers. the x-ray diffraction (xrd) patterns confirmed the multilayered structure with the nanometer thicknesses. also, electron diffraction x-ray (edx)  analysis confirmed the purity of deposited samples. ...

Nanoscale alloys attract enormous research attentions in catalysis, magnetics, plasmonics and so on. Along with multicomponent synergy, quantum confinement and extreme large surface area of nanoalloys offer novel material properties, precisely and broadly tunable with chemical composition and nanoscale dimension. Despite substantial progress of nanoalloy synthesis, the randomized positional arr...

The performance of Ni-Cu/Al2O3 catalysts for steam reforming (SR) of gasoline to produce a hydrogen-rich gas mixture applied in a spark ignition (SI) engine was investigated at relatively low temperature. The structural and morphological features and catalysis activity were observed by X-ray diffractometry (XRD), scanning electron microscopy (SEM), and temperature programmed reduction (TPR). Th...