Niobium based super alloys are an unusual class of metallic materials with an exceptional combination of high temperature strength, toughness, and resistance to degradation in corrosive or oxidizing environments. The focus of present work was to study the effect of cutting parameters – speed, feed and depth of cut on the machinability of Niobium C-103 under dry machining condition using respons...

one of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. as a result, the tool would be worn and its life time would be reduced. therefore, in long time machining, it is essential to change inserts and tools, continiously. a milling tool with self rotary cutting inserts was designed and manufactured that enables i...

17-4ph stainless steel is a martensitic precipitation hardening stainless steel that provides an outstandingcombination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. this valuable alloy is widely used in the aerospace, nuclear, chemical, petr...

Abstract—Water miscible cutting fluids are conventionally used to lubricate and cool the machining zone. But issues related to health hazards, maintenance and disposal costs have limited their usage, leading to application of Minimum Quantity Lubrication (MQL). To increase the effectiveness of MQL, nanocutting fluids are proposed. In the present work, water miscible nanographite cutting fluids ...

This paper focuses on the development of high temperatures in the cutting zone during high performance grinding. In order to identify the infl uence of grinding temperature on surface integrity, temperatures were measured in the workpiece surface layer under diff erent machining conditions. Beside this, under the same conditions, the surface layer properties of the workpiece material were deter...

Part thermal damage is a process limitation in finish hard turning and understanding process parameter effects, especially, tool wear, on cutting temperatures is fundamental for process modeling and optimization. This study develops an analytical model for cutting temperature predictions, in particular, at the machined-surfaces, in finish hard turning by either a new or worn tool. A mechanistic...

One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...