Traditional DC-DC Boost converters are used in high voltage applications, but they are not economical due to limited output voltage, large voltage ripples, current ripples and power losses. A closed loop control scheme for a simple DC-DC Boost converter in designed and the performance characteristics are studied using MATLAB simulink. The performance of the controller is also studied for variou...

This paper proposes a high voltage ratio and low ripple interleaved boost DC-DC converter, which can be used to reduce the output voltage ripple. This converter transfers the low DC voltage of fuel cell to high DC voltage in DC link. The structure of the converter is parallel with two voltage-doubler boost converters by interleaving their output voltages to reduce the voltage ripple ratio. Besi...

DC-DC power converters with multiple inputs and a single output are used in numerous applications where multiple sources, e.g., two or more renewable energy sources and/or a battery, feed a single load. In this work a classical boost converter topology with two input branches connected to two different sources is chosen, with each branch independently being controlled by a separate peak current...

A simple step and search control strategy for extracting maximum output power from grid connected Variable Speed Wind Energy Conversion System (VSWECS) is implemented in this work. This system consists of a variable speed wind turbine coupled to a Permanent Magnet Synchronous Generator (PMSG) through a gear box, a DC-DC boost converter and a hysteresis current controlled Voltage Source Converte...

This paper presents development of an optimal control strategy for a hybrid photovoltaic/battery energy storage (PV/BES) system. The fluctuations at the DC bus voltage due to voltage sag were mitigated by using charge/discharge capability of the BES through the DC/DC buck/boost converter. Furthermore, an optimization of system control parameters responsible for DC bus voltage regulation within ...

In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...

In this paper direct AC to DC is converted by proposed model from low AC voltage to high DC voltage in single stage conversion. And this paper presents an efficient AC to DC power that avoids the bridge rectification and directly converts low AC input voltage to high DC output voltage. This proposed converter consists boost converter and buck-boost converter both are connected in parallel to pr...

In this project presents a new non conventional energy source based bidirectional dc/dc converter for transfer the power in both directions. The nonconventional source of solar energy with Maximum Power Point Tracking is used to avoid the demand of electric power, which is inexhaustible and non pollution .The maximum power point traction is the combination of switch mode converter and Controlle...

This paper analyses and compares PWM control strategy of control and buffer type soft switching half bridge DC/DC converter. Finally, the soft switching condition are analyzed, and this article gets the realization of soft switching conditions of the three half bridge DC/DC converter and the influence factors of soft switching conditions of the three half bridge DC/DC converter. Characteristics...

Renewable energy sources and in particular Photovoltaic (PV) system are implemented in large scale in many countries for power generation. The characteristics of PV arrays are non-linear i.e., the change in temperature and irradiation levels results in change of power generated by the PV arrays. DC-DC converters are connected between the PV system and the load as power conditioning unit to regu...