In this study, the effects of cerium (Ce) addition on the friction and wear properties of surface welding AZ91 magnesium alloys were evaluated by pin-on-disk dry sliding friction and wear tests at normal temperature. The results show that both the friction coefficient and wear rate of surfacing magnesium alloys decreased with the decrease in load and increase in sliding speed. The surfacing AZ9...

In heavy loaded mating components, such as sliders and sliding bearings, guaranteeing the efficiency of lubricant films for long times during severe service conditions is very complicated. In this work, the benefits deriving from the use of fiber laser sources for surface texturing of very thin TiN coatings in severe wear working conditions were demonstrated. Evaluations of the laser textured d...

The use of Fe-Al intermetallic compound coatings has been investigated in order to improve the tribological behaviour of carbon tool steel. The coatings were formed by a pack cementation process and subsequently diffusion annealing at 900˚C in an argon controlled atmosphere. The optimum diffusion time was selected on the basis of optimum thickness and tribological behaviour.&#10The microstructu...

Surfaces of medical implants can be enhanced with the favorable properties of titanium-nitride (TiN). In a review of English medical literature, the effects of TiN-coating on orthopaedic implant material in preclinical studies were identified and the influence of these effects on the clinical outcome of TiN-coated orthopaedic implants was explored. The TiN-coating has a positive effect on the b...

Abstract Carbon-fiber-reinforced polymer composites (CFRPs) are widely used in industry due to their outstanding mechanical properties combined with reduced density and good corrosion fatigue resistance. Although composite components manufactured near net shape, further machining operations required. Drilling is the most common operation, involving a significant percentage of total production c...

To qualify high-entropy alloys (HEAs) as resource-saving and high-temperature wear-resistant coating materials, high-velocity oxygen fuel (HVOF) coatings produced from the inert gas-atomized powder of Al0.3CrFeCoNi, Al0.3CrFeCoNiNb0.5 Al0.3CrFeCoNiMo0.75 were investigated in reciprocating wear tests at temperatures 25, 500, 700 900 °C. In addition to tests, microstructure chemical composition t...

The present article studied the effect of ultrasonic surface rolling process (USRP) on the microstructure and wear behavior of a selective laser melted Ti-6Al-4V alloy. Surface characteristics were investigated using optical microscope, nano-indentation, scanning electron microscope, transmission electron microscope and laser scanning confocal microscope. Results indicated that the thickness of...

Introduction One of the common prostheses for primary total knee arthroplasty (TKA) is a cruciate-retaining (CR) design. The tibial polyethylene inserts commonly used in TKA are made of ultra-high molecular weight polyethylene (UHMWPE). The CR TKA design retains the posterior cruciate ligament (PCL), which is believed to provide increased stability, promote femoral roll back, improve propriocep...

The present study concentrates on optimization and the effect of machining parameters delamination that occurs during drilling operation pure glass fiber-reinforced polymer (GFRP) composites added GFRP which were developed for resistance to erosion wear. Contribution was investigated by using Taguchi method analysis variance (ANOVA). Relationship between modelled response surface methodology. C...

BACKGROUND Polyethylene wear is an important factor for longevity of total knee arthroplasty. Proven and suspicious factors causing wear can be grouped as material, patient and surgery related. There are more studies correlating design and/or biomaterial factors to in vivo wear than those to patient and surgery related factors. Many retrieval studies just include revision implants and therefore...