Hydraulic fracturing is used in the oil industry in order to increase the index of production and processing in the wells whose efficiencies have been dropped due to a long-term harvest or the rocks around the wells are of low permeability. Since the hydraulic fracturing operation is costly, it is of special importance to the project managers to determine the pressure required for hydraulic fra...

A simple two-pump model has served to describe the mechanics of ventilation in cartilaginous and bony fishes since the pioneering work of G. M. Hughes. A hallmark of this model is that water flow over the gills is continuous. Studies of feeding kinematics in the swellshark Cephaloscyllium ventriosum, however, suggested that a flow reversal occurred during prey capture and transport. Given that ...

This work presents a novel control index to regulate the pump speed of an axial flow blood pump for the left ventricular assist device (LVAD). The control index is based on the characterization of pump operating conditions such as normal or suction status. The pump operating characteristics reveal that a certain pulsatility relationship between the pump pressure difference and the pump flow is ...

Two stages gas guns are used for various purposes, particularly for mechanical characterization of materials at high rate of deformations. The performance of a two stages gas gun is studied in this work using the theory of the two-stage gas gun proposed by Rajesh, numerical simulation using combined Eulerian/ Lagrangian elements in Autodyna commercial code and experiment using a two stage gas g...

1. A new non-invasive test was developed to assess calf muscle pump function: the supine venous pump function test. The technique uses strain-gauge plethysmography and is performed in the supine position. The method is superior to other non-invasive methods because basically the most essential haemodynamic parameter, venous pressure decrease, is used by properly converting venous volume measure...

BACKGROUND Upper airway (UA) patency during inspiration is determined by the balance between dilating forces generated by UA dilator muscle activity and collapsing forces related to the decreased intraluminal pressure that accompanies flow generated by inspiratory muscle activity. It is possible that the relative strengths of UA dilator and inspiratory pump muscles could be an important determi...

A high-pressure electro-osmotic micro-pump fabricated by a sol-gel process is reported as a fluid-driving unit in a flow-injection analysis (FIA) system. The micro FIA system consists of a monolithic micro-pump on a glass slide (2.5 x 7.5 cm), a micro-injector, and a micro-sensor (2.5 x 1.5 cm). The monolithic silica matrix has a continuous skeleton morphology with micrometer-sized through-pore...

The objective of this study is to explore an optimal strategy on energy consumption for a direct expansion (DX) air-conditioning system by using a refrigerant pump in the liquid line to allow the system to operate at a lower condensing pressure. An existing DX rooftop package of a commercial building located in a hot and dry climate zone is used for data collection. The theoretical-empirical mo...

The American Thoracic Society (ATS) recently adopted a new set of 26 standard flow-time waveforms for use in testing both diagnostic and monitoring devices. Some of these waveforms have a higher frequency content than present in the ATS-24 standard volume-time waveforms, which, when produced by a mechanical pump, may result in a pump flow output that is less than the desired flow due to gas com...