نتایج جستجو برای: dissimilar joint
تعداد نتایج: 199506 فیلتر نتایج به سال:
Laser beam welding of dissimilar sheet metal combinations such as Ti/Al, SS/Al and Cu/Al are increasingly demanded due to high energy densities with less fusion and heat affected zones. A good weld joint strength involves combinations of dissimilar metals and the formation of solid solution in the weld pool. Many metal pairs suffer from significant intermetallic phase formation during welding w...
In present study, the effect of heat treatment after friction stir welding dissimilar welds T6-7075 and T4-2024 aluminum alloys were investigated. Friction stir welding was performed at a constant rotation speed of 1140 rpm and welding speed 32 mm/min. After welding samples are taken under various heat treatment processes at different aging temperature and time period. Microstructural observati...
Friction stir spot welding (FSSW) is a type of solid state that has been widely developed using both similar and dissimilar materials. Aluminum AA1100 (99% Al) brass (Cu-Zn) with thickness 0.42 mm are used in this joint.
سوپر آلیاژ اینکولوی 800 و فولاد مقاوم به حرارت hp به دلیل استحکام بالا و مقاومت عالی به خوردگی و اکسیداسیون در دماهای بالا کاربردهای متنوعی را در صنایع گوناگون پیدا کرده و اتصال آنها اهمیت یافته است. در این پژوهش ابتدا تغییرات ریزساختاری و خواص مکانیکی دو آلیاژ اینکولوی 800 و فولاد hpقبل و بعد از قرار گرفتن طولانی مدت درمعرض دماهای بالا مورد بررسی قرار گرفت. بررسی های ریز ساختاری با استفاده از ...
In the present study, the Weldability and microstructure of dissimilar welds of AISI 347austenitic stainless steel to ASTM A335 low alloy steel was investigated. For this purpose, gas tungsten arc welding process and two filler metals including ERNICr-3 and ER309L were used. After welding, the microstructure of the different zones of each joint, including weld metals, heat affected zone (HAZ) 1...
In this research, the effect of temperature and time on the properties of AISI420/SAF2507 dissimilar joint produced by transient liquid phase bonding process was investigated. A BNi-2 interlayer with 25 μm thickness was inserted between two dissimilar steel samples. The bonding process was performed at 1050 oC and 1100 oC for different bonding times. The microstructures of the joints were studi...
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید