”Radiographic Testing is a NDT method to detect inherent volumetric discontinuities in materials such as castings and welds” A common type of discontinuity found and most often misinterpreted and evaluated is rounded indications, whether isolated, aligned or clustered. This paper addresses the acceptance criteria of rounded indications based on various codes and standards and intends to lay at ...

We present a principle and a simple theory of a novel reverse electroactuator, in which the electrical current is generated by pumping an electrolytic liquid into nonwetting pores of a polarized electrode. The theory establishes the relationship between the variation of external pressure and the electrical current. The effective current density is amplified by the high porosity of the electrode...

Carbon electrochemical capacitor electrodes containing nitrogen groups were studied with respect to their electrochemical behaviour, chemical composition and physical characteristics. Thermal treatment of nitrogen-enriched carbon materials in different atmospheres was used to control the specific type and concentration of nitrogen groups present, while importantly retaining similar pore size di...

A pseudo two-dimensional model is developed for the general application of supercapacitors consisting of an oxide/carbon composite electrode. The model takes into account the diffusion of protons in the oxide particle by employing the method of superposition. RuO2/carbon system is modeled as a specific example. From the simulation data, it is found that the oxide particle size and proton diffus...

A method is described for quantitatively analyzing the level of interconnectivity of solid-oxide fuel cell electrode phases. The method was applied to the three-dimensional microstructure of a Ni-Y2O3-stabilized ZrO2 (Ni-YSZ) anode active layer measured by focused ion beam scanning electron microscopy. Each individual contiguous network of Ni, YSZ, and porosity was identified and labeled accord...

In a fluid-saturated porous formation, an impinging seismic wave induces fluid motion. The motion of fluid relative to the rock frame generates an electric streaming current. This current produces electric and magnetic fields, which are called seismoelectric and seismomagnetic fields, respectively. When there is a fracture or a discontinuity, a radiating electromagnetic wave is also generated, ...

Designing optimal microstructures for solid oxide fuel cell (SOFC) electrodes is complicated due to the multitude of electro-chemo-physical phenomena taking place simultaneously that directly affect working conditions of a SOFC electrode and its performance. In this study, a new design paradigm is presented to obtain a balance between electrochemical sites in the form of triple phase boundary (...

Conversion of low-grade waste heat into electricity is an important energy harvesting strategy. However, abundant heat from these low-grade thermal streams cannot be harvested readily because of the absence of efficient, inexpensive devices that can convert the waste heat into electricity. Here we fabricate carbon nanotube aerogel-based thermo-electrochemical cells, which are potentially low-co...

A series of 250–350 μm-thick single-sided lithium ion cell graphite anodes and lithium nickel manganese cobalt oxide (NMC) cathodes with constant area weight, but varying porosity were prepared. Over this wide thickness range, micron-sized carbon fibers were used to stabilize the electrode structure and to improve electrode kinetics. By choosing the proper porosities for the anode and cathode, ...

In the current study, we report new flexible, free standing and high performance electrodes for electrochemical supercapacitors developed througha scalable but simple and efficient approach. Highly porous structures based on carbon fiber and poly (vinyl alcohol) (PVA) were used as a pattern. The electrochemical performances of Carbon fiber/GO-MnO2/CNT supercapacitors were characteriz...