Unmanned Aerial Vehicles (UAVs) have high popularity, especially in the military field, but are now also being applied to private and public sectors. One of UAV components that require material technology is wing. The latest developed as a for unmanned aircraft wings composite has strength lightweight. This research aims identify materials can be used wing structures. method this qualitative wi...

In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were embedded into the GF/epoxy composites with three kinds of modes. The effect of SMA content and the position on the flexural, low-velocity impact per...

Highly conductive fillers have a strong influence on improving the poor out of plane thermal conductivity of carbon fiber reinforced composites. The objective of this study has been to investigate the role of the diamond powder (DP) in enhancing the out-of-plane thermal conductivity of the woven composites. Samples of the standard modulus T300 carbon fiber composite with 44% and 55% fiber volum...

Short banana fiber reinforced composites have been prepared in laboratory to determine mechanical properties. It has been observed that as soon as the percentage of the banana fiber increases slightly there is a tremendous increase in ultimate tensile strength, % of strain and young modulus of elasticity. Reinforcement of banana fibers in epoxy resin increases stiffness and decreases damping pr...

Abstract This study was made on domestic T1000 carbon fiber to investigate its surface condition, precursor, multifilament, fiber/resin contact angle, interfacial shear strength and interlaminar strength. Analysis carried out examine the physical state of fiber, micro-scale properties mechanical composites. The results show that grade has no inherent characteristic defects such as visible bumps...

In this paperwe investigate themechanical behavior of carbonfiber composites,where the carbonfibers are coated with radially aligned carbon nanotubes. For this purpose we develop a general micromechanics method for fiber composites, where fibers are coated with radially aligned microfibers (‘‘fuzzy fiber’’ composites). The mechanical effective properties are computed with a special extension of...

In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...

In this article, the effect of combined temperature-concentration and shear rate conditions on the rheology of double-walled carbon nanotubes (DWCNTs)/ RTM6-Epoxy suspension was investigated to determine the optimum processing conditions. The rheological behavior and cure kinetics of this nanocomposite are presented. Cure kinetics analysis of the epoxy resin and the epoxy resin filled with DWCN...