results the results showed that the epoxy plates 6 and 2 mm thick had the highest and the lowest averages of shielding effectiveness at 4.48 db and 1.90 db, respectively. however, increasing the thickness was useful up to 4 mm. in addition, in a similar attenuation pattern, x-band frequency was divided into lower, middle, and upper sections. the lower section had the highest shielding effective...

The majority of currently published dispersion protocols of carbon nanotubes rely on techniques that are not scalable to an industrial level. This work shows how to obtain polymer nanocomposites with good mechanical characteristics using multi-walled carbon nanotubes epoxy resins obtained by mechanical mixing only. The mechanical dispersion method illustrated in this work is easily scalable to ...

polysulfide resins,with trade name of  g4 and g112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. the effects of molecular weights of g4 and g112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition  heat and adhesion properties of toughened epoxy were investigated. the impact strength and the dielectr...

In this article we introduce and compare three techniques for low-cost and rapid bonding of stereolithographically structured epoxy components to polydimethylsiloxane (PDMS). In short, we first create a polysiloxane layer on the epoxy surface via silane surface coupling and polymerization. Afterwards, the modified epoxy surface can be bonded to a PDMS component at room temperature using a handh...

....................................................................................................................... x CHAPTER 1. GENERAL INTRODUCTION ............................................................. 1 1.

After phenylmaleimido group was successfully incorporated into bisphenol-A type epoxy resins (B-13 ) to result in compound possessing both oxirane ring and maleimide reactive groups. The cured maleimide epoxy samples are obtained by thermally curing of the maleimide epoxy (MIE) compounds with aliphatic long chained amines such as Tetraethylenepentamine (TEPA), Bishexamethylenetriamine (BHMT), 2...

11.