Interlaminar shear strength (ILSS) of fiber reinforced polymer composite is an important property for most of the structural applications. Matrix modification is an effective method used to improve the interlaminar shear strength of composite. In this paper, EPON 862/w epoxy system was modified using Tetraethyl orthosilicate (TEOS) electrospun nanofibers (ENFs) which were produced using electro...

The mechanical characterization of short E- glass fiber reinforced, graphite and sintered bronze filled epoxy composite was carried out in this study. The aim of the present study was to develop tribological engineering material. In this study the flexural strength, theoretical and experimental density, Hardness and Impact strength of composites was investigated experimentally. The results show...

OBJECTIVES To determine the static load-bearing capacity of direct composite onlay restorations made of novel filling composite resin system which combines short fiber-reinforced composite resin (FC) and conventional particulate filler composite resin (PFC). METHODS Three groups of onlay restorations were fabricated (n = 8/group); Group A: made from conventional particulate filler composite r...

Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through th...

Glass fiber reinforced plastic composite materials are finding increased applications due to their excellent properties. Fiber reinforced plastic (FRP) composite materials comprise soft matrix and fiber elements. This article presents the tribological aspects of glass fiber reinforced plastic composites. The wear test is carried out for FRP in a pin-on-roller wear tester. The wear rate obtained...

OBJECTIVE The main objective of this study was to evaluate the wear characteristics of fiber-reinforced dental composites. Variables under investigation include the fiber weight percent added to the matrix as well as fiber length. METHODS Dental specimens with glass fiber content of 2, 5.1, 5.7, and 7.6 wt% with fiber length of either 1.5 or 3 mm, were prepared by mixing an activated dental r...

A functionally graded (FG) material system is employed to make fiber use more efficient in a fiber reinforced cement composite (FRCC). This preliminary study demonstrates beam elements that were functionally graded fiber reinforced cement composite (FGFRCC) with four layers, each with a different fiber volume ratio. Fiber volume ratio was graded in accordance with its potential contribution to ...

Background Fiber reinforced composite (FRC) is a promising class of material that gives clinicians alternative treatment options. There are many FRC products available in the market based on either glass or polyethylene fiber type. The aim of this study was to present a comparison between glass and polyethylene fiber reinforced composites based on available literature review. Material and Met...

BACKGROUND The purpose of this study was to compare the adaptation of fiber reinforced composite post system and cast post-and-core. METHODS 17 extracted human permanent maxillary central incisors were endodontically treated following the standard protocol. 17 fiber reinforced composite post had been fabricated and adapted to the prepared parallel root canals. A light body poly vinyl siloxane...

The reconstruction of structurally compromised non-vital posterior teeth may represent one of the most challenging adhesive-based restorative procedures. Several factors may influence the longevity of direct fiber-reinforced resin composite restorations: endodontic procedures prior to post cementation, dentin and/or post surface treatments, selection of the appropriate post design and architect...