The experimental investigations of the delamination factor of glass fiber reinforced plastic at different cutting parameters are reported in this study. This paper has involved the determination of different factors affecting the hole quality and cause of delamination in a glass fiber reinforced plastic. The various process parameters like different twist drill bits of different materails, diff...

Lockin thermography is a well-suited method for the characterization of structures made of both metal and fiber reinforced plastic. In most cases, only phase images are analyzed, although the amplitude images might contain useful information as well. Thus, systematic studies of lockin thermography are presented, assessing amplitude and phase images for the detection and quantification of defect...

the idea of combining low weight and good mechanical properties has led to efforts to develop a new light fiber/metal laminate (fml) in the last decade. fmls are hybrid composites consisting of alternating thin layers of metal sheets and fiber-reinforced epoxy prepregs. in this study, the effect of fiber orientation on tensile properties of this material is investigated both analytically and ex...

As the human race will continue to explore the space by creating new space transportation means and sending them to other planets, the enhance of atmospheric reentry study is crucial. In this context, an analysis of mass recession rate of ablative materials for thermal shields of reentry spacecrafts is important to be carried out. The paper describes a new estimation method for calculating the ...

A multi-objective optimization method for the structural design of horizontal-axis wind turbine (HAWT) blades is presented. The main goal is to minimize the weight and cost of the blade which uses glass fiber reinforced plastic (GFRP) coupled with carbon fiber reinforced plastic (CFRP) materials. The number and the location of layers in the spar cap, the width of the spar cap and the position o...

Measurements have been made of the temperature distribution in the antenna backing structures on the 6 m diameter antennas of the BIMA Array at Hat Creek. 32 thermistors were distributed around the backing structure and on one panel and were monitored under varying conditions. Significant gradients were found between the front and rear of the backing structure, across the structure, and radiall...

High Performance Fiber Reinforced Cementitious Composite (HPFRCC) materials exhibit strain hardening behavior with multiple cracking under tensile loading. In this paper, experimental and parametric studies are performed to assess the influence of using HPFRCC material instead of normal concrete in reinforced concrete beams. After calibrating the experimental results, the analytical results inc...

Potassium methyl siliconate (PMS) was investigated as a new nano modifier of wood fiber and wood flour to improve the compatibility between the fiber/flour and the plastic matrix in fiber reinforced plastic composites. Before injection molding, bleached and brown pulp fibers and mixed species wood flour were pretreated in PMS solutions. The morphology of the treated and untreated fiber and flou...

In this paper, the electromagnetic shielding characteristics of an up-to-date typical carbon filler material, carbon fiber used with a metal mesh were investigated. Carbon fiber 12k-prepregs, where carbon fibers were impregnated with epoxy, were laminated with wire meshes, vacuum bag-molded and hardened to manufacture hybrid-type specimens, with which an electromagnetic shield test was performe...

In moment resisting reinforced concrete framed buildings, corner joints are found at the roof level. These joints, if designed for gravity loads and are based on pre-seismic codes, may suffer substantial damage during earthquakes particularly under opening cycles, i.e. those causing flexural tension on the inside of the joint. Several techniques of repair and strengthening of reinforced concret...