High-porosity magnesia phosphate paste (HPMPP) was prepared via the pre-foaming method. In the pre-foaming method, sintering treatment was not required. The bulk density and maximum compressive strength of the HPMPP prepared according to the ratio of water to solids (W/So) of 0.32 reached 464.00 ± 5.00 Kg/m(3) and 0.30 ± 0.05 MPa, respectively. The compressive strength increased with the increa...

Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...

Polypropylene / polystyrene blends containing montmorillonite (MMT) were prepared using a twin screw extruder followed by fiber spinning. The melt intercalation of PP and PS alloys was carried out in the presence of a compatibilizer such as maleic anhydride-g-polypropylene (MPP). The crystallization morphology, thermal behaviors and mechanical properties of polypropylene/polystyrene (PP/PS) nan...

Olefin fibers, also called polyolefin fibers, are defined as manufactured fibers in which the fiber-forming substance is a synthetic polymer of at least 85 wt% ethylene, propylene, or other olefin units (1). Several olefin polymers are capable of forming fibers, but only polypropylene [9003-07-0] (PP) and, to a much lesser extent, polyethylene [9002-88-4] (PE) are of practical importance. Olefi...

the total coal and lignite consumption of the thermic power plants in turkey is approximately 55 million tons and nearly 15 million tons of fly ash is produced. the remarkable increase in the production of fly ash and its disposal in an environmentally friendly manner is increasingly becoming a matter of global concern. studies for the utilization of fly ash in turkey are necessary to reduce en...

The effect of wood flour and coupling agent content on the hygroscopic thickness swelling rate of polypropylene composites was investigated in this study. To meet this objective, the wood flour was compounded with polypropylene and coupling agent in an internal mixer; then the samples were fabricated by injection molding. The concentration was varied from 40 to 60% for wood flour and from 0 to ...

this work has setup to determine the effects of a solvent on the structure and properties of polypropylene fibres with different physical structures. samples of continuous filament yarns with different physical structures (partially oriented (poy) and drawn yarns) are treated with decahydronaphthalene (decalin) at 28, 55, 75 and 95oc. at 95oc, the samples are dissolved completely in decalin and...