In this paper, we present a topology with design equations for the rigorous of multiway power dividers having pre-defined filtering response featuring broadband isolation between any pair output ports. Hence, divider designed using presented and formulas can suppress undesired oscillations at spurious frequencies when used as combiner. More importantly, provide complete mathematical designing v...

a power divider (pd)/ power combiner (pc) with high quality factor and enhanced output ports isolation using substrate integrated waveguide (siw) technology is proposed. an siw cavity is designed to provide a high quality factor filtering response and an smd resistor is attached between two output ports to realize the high isolation. the value of the applied resistor is calculated by using the ...

We report a 72.8 GHz fully static frequency divider in AIInAs/InGaAs HBT IC technology. The CML divider operates with a 350 mV logic swing at less than OdBm input power up to a maximum clock rate of 63 GHz and requires 8.6 dBm of input power at the maximum clock rate of 72.8GHz. Power dissipation per flip-flop is 55mW with a 3.1V power supply. To our knowledge this is the highest frequency of o...

This letter presents a new triple-band four-way filtering power divider (FPD) with greatly improved frequency selectivity and in-band isolation. By elaborately developing multi-port multi-mode topology between four identical resonators feedlines, FPD is attained. In order to validate the feasibility of proposal, one prototype designed, fabricated, measured. Both simulated measured results desig...

This paper proposes an ultra-compact filtering power divider with a wide harmonic suppression band. In this design, the proposed (PD) in ideal case has 100% size reduction and infinite number of harmonics suppression. However, real case, 92% suppresses 2nd to 45th harmonics. The small-proposed is designed at 0.9 GHz. typical Wilkinson two long quarter-wavelength branches. new resonant series LC...

DESIGN, ANALYSIS, AND CONSTRUCTION OF AN EQUAL SPLIT WILKINSON POWER DIVIDER Logan J. Berens, B.S. Marquette University, 2012 The Wilkinson power divider is a well known device in the RF/microwave community used for splitting or combining signals. It is composed of simple transmission lines and a resistor, and takes advantage of the properties of quarterwavelength transmission line sections to ...