An experimental and numerical study was performed on the interaction of combustible solid particles with atmospheric, strained, laminar premixed methane/air and propane/air flames in normal gravity. The study was conducted in the opposed-jet configuration in which a single flame was stabilized below the gas stagnation plane by counterflowing a mixture against an air jet. Into the flame were see...

The flame plasma treatment studied in this thesis was able to oxidize the surface of Polydimethylsiloxane (PDMS) in a fraction of a second. It was found to be a much faster way to modify PDMS surface wettability than the current technologies. The surface wettability of Polydimethylsiloxane (PDMS) treated with flame plasma was studied. The surface wettability was characterized by contact angle m...

The effect of O(3) on C(2)H(4)/synthetic-air flame propagation at sub-atmospheric pressure was investigated through detailed experiments and simulations. A Hencken burner provided an ideal platform to interrogate flame speed enhancement, producing a steady, laminar, nearly one-dimensional, minimally curved, weakly stretched, and nearly adiabatic flame that could be accurately compared with simu...

Abstract A flamelet-based approach that accounts for turbulence-chemistry interaction has been formulated to simulate NOx formation in turbulent lean premixed combustion. In the simulations, the species NO is transported and solved with the chemical source term being modelled through its formation in flame fronts and its formation rate in post-flame regions. The flame-front NO and post-flame NO...

nowadays, utilization of blended fuel in internal combustion engine is one of main topics in vehicle industries. the synergy effect will be highlighted when the potential of each fuel is employed and the engine performance will improve consequently.  in this research, the laminar flame speed of methane (main component of reference fuel for natural gas) and isooctane (main component of reference...

The characteristics of triple flames in a hydrogen–air mixing layer are studied using direct numerical simulation with detailed chemistry. Triple flames are initiated by imposing a temperature ignition source in the center of a scalar mixing layer of nonuniform thickness, thereby forming a pair of freely propagating triple flames. Two different fuel streams are studied: pure hydrogen and hydrog...

In this work we present a numerical iterative procedure for the evaluation of the effect of signal absorption in two-color laser-induced incandescence (2C-LII) measurements. The correction process is applied to experimental results, previously published by our group, in an axisymmetric diffusion flame. We have studied the influence of signal trapping on peak soot temperature and on soot volume ...

An experimental and computational investigation on the liftoff characteristics of laminar partially premixed flames (PPFs) under normal (1-g) and microgravity (μ-g) conditions is presented. Lifted methane–air PPFs were established in axisymmetric coflowing jets using nitrogen dilution and various levels of partial premixing. The μ-g experiments were conducted in the 2.2-s drop tower at the NASA...

A novel flame retardant, zinc hydroxystannate-decorated graphene oxide (ZHS/GO) nanohybrid, was successfully prepared and well characterized. Herein, the ZHS nanoparticles could not only enhance the flame retardancy of GO with the synergistic flame-retardant effect of ZHS but also prevent the restack of GO to improve the mechanical properties of poly (vinyl chloride) (PVC) matrix. The structure...