This study is based on the necessity of sustainable housing in earthquake-prone and wind-prone coastal locations. It focuses determining load-slip behavior, failure mode, ductility low-strength concrete made with brick aggregate containing channel angle shear connectors fixed wide flanged beam. Under monotonic loading, have an average 15.11% 54.81% higher capacity slip than slab. Shear loads fr...

BACKGROUND This biomechanical study examined difference in cement pressures generated by flanged and unflanged acetabular cups in hip arthroplasty. METHOD Using a model acetabulum, cement was inserted and pressurised followed by cup insertion and pressurisation. Pressures were recorded using transducers in the acetabulum. We compared Charnley Ogee (flanged), Exeter contemporary (flanged) and ...

The result showed that the brittle failure was extinct, and the new-type shear walls had good deformability whose ductility factors were over 4.3. The axial compression ratio had significant influence on the mechanical properties of the new-type shear walls. As the increscent of the axial compression ratio, the shear capacity and initial stiffness were improved, but the energy-dissipating capac...

During recent years, the use of fiber-reinforced polymers (FRP) as a desirable alternative for improving the behavior of lateral resisting system are known. There are various factors influencing the quality of such kind of rehabilitation. This study aims to investigate the influence of geometric characteristics and arrangement of FRP layers on rehabilitating of concrete shear walls.  A few rein...

In this study the performance of three macro-models in predicting the nonlinear response of different walls is investigated. The macro-models used are: Equivalent Beam Model, Multiple Vertical Line Element Model and a shear panel model developed by Massone et al. (2006). The walls are classified as slender, intermediate, and squat walls according to their shear-span ratio. First, three single w...

In recent years, various studies have been undertaken on how to use waste materials in civil engineering projects. Among waste materials, waste rubber has been highlighted to be used for different purposes such as reinforcing of soil and making of reinforced slopes. To investigate the properties of granulated rubber-soil mixture and its application in making of slopes behind retaining walls, so...

Seismic analyses of concrete structures under maximum-considered earthquakes require the use of reduced stiffness accounting for cracks and degraded materials. Structural walls, different to other flexural dominated components, are sensitive to both shear and flexural stiffness degradations. Adoption of the gross shear stiffness for walls in seismic analysis prevails particularly for the design...

Abstract—R.C.C. buildings with dual structural system consisting of shear walls (or braces) and moment resisting frames have been widely used to resist lateral forces during earthquakes. The dual systems are designed to resist the total design lateral force in proportion to their lateral stiffness. The response of combination of braces and shear walls has not yet been studied. The combination m...

Quasi-static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For slender RC walls that form a stable flexural mechanism, the ratio of shear to flexural deformations remains approximately constant over the entire range of imposed displacement ductiliti...

In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-sh...