Thermochemical conversion of sugarcane bagasse into bio-crude oils by fluidized-bed reactor has been taken into consideration in this study. The bagasse in particle form was pyrolyzed in an externally heated 7cm diameter and 37.5cm high fluidized-bed reactor with nitrogen as a carrier gas. The reactor chamber and gas-preheater were heated by means of a renewable energy biomass source cylindrica...

Palm kernel shell is an important bioenergy resource in Thailand. However, due to elevated alkali content in biomass ash, this oil palm residue shows high tendency to bed agglomeration in a fluidized-bed combustion system using conventional bed material (silica sand). In this study, palm kernel shell was burned in the conical fluidized-bed combustor (FBC) using alumina and dolomite as alternati...

Several reactor configurations have been tested for catalytic propane dehydrogenation employing Pt-Sn/MgAl2O4 as a catalyst. Pd-Ag alloy membranes coupled to the multifunctional Two-Zone Fluidized Bed Reactor (TZFBR) provide an improvement in propane conversion by hydrogen removal from the reaction bed through the inorganic membrane in addition to in situ catalyst regeneration. Twofold process ...

release  volatile  organic  compounds  (vocs)  as  environmental  and  occupational  pollutant  cause  macro perspective affect such as climate change, humans and economic consequences. although fixed bed absorber is widely used as a controlling method because of its economically and availability, but these absorbers are facing some issue like high pressure drop, non-uniform distribution of flu...

UNLABELLED BACKGROUND The process of thermal decomposition of dichloromethane (DCM) and chlorobenzene (MCB) during the combustion in an inert, bubbling fluidized bed, supported by LPG as auxiliary fuel, have been studied. The concentration profiles of C6H5CI, CH2Cl2, CO2, CO, NOx, COCl2, CHCl3, CH3Cl, C2H2, C6H6, CH4 in the flue gases were specified versus mean bed temperature. RESULTS The...

conclusions results indicated that annular fluidized bed reactor’s adsorbers are useful techniques for vocs adsorption. comparison of two particle ranges indicates that in all concentrations and all flow rates of the experiments, smaller particle size adsorption are better. in superficial velocity above the minimum fluidization velocity, pressure drop of fluidized beds are less than the pressur...

Gasification of pyrolysis oil was studied in a fluidized bed over a wide temperature range (523-914 °C) with and without the use of nickel-based catalysts. Noncatalytically, a typical fuel gas was produced. Both a special designed fluid bed catalyst and a crushed commercial fixed bed catalyst showed an initial activity for syngas (H2 and CO) production at T >700 °C. However, these catalysts los...

This paper presents the numerical investigation of the effects of the general bed characteristics such as superficial gas velocities, bed temperature, bed heights and particle size, on the direct synthesis in a 3D fluidized bed reactor. A 3D model for the gas flow, heat transfer, and mass transfer was coupled to the direct synthesis reaction mechanism verified in the literature. The model was v...

in present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. a double active sites model for ziegler-natta catalysts is used for simulation of polymerization reaction. hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with differentiall...