The primate orbitofrontal cortex (OFC) is a site of convergence from primary taste, olfactory, and somatosensory cortical areas. We describe the responses of a population of single neurons in the OFC that respond to orally applied fat (e.g., safflower oil) and to substances with a similar texture but different chemical composition, such as mineral oil (hydrocarbon) and silicone oil [(Si(CH3)2O)...

Heavy crude oil can be upgraded to lighter oil using several techniques. However, current methods usually require high temperatures, long reaction duration, and cause serious environmental pollution. This study shows that by using carbon nanocatalysts, heavy crude oil can be efficiently upgraded to lighter oil at a relatively low temperature of about 150 °C. The temperature of crude oil was inc...

Steam injection is the most suitable of Enhanced Oil Recovery (EOR) methods to recover high viscosity oil. This is due to the capabilities of steam to reduce oil viscosity and increase the sweep capability of oil from the injection well toward the production well. Oil operating conditions in production should be match well with the operating condition target at the bottom of the production well...

In this paper we assume determination of pseudo-viscosity coefficients of visco-elastic non-Newtonian fluid flow directly near the cooperating micro-bearing surface. We show the constitutive stress-strain dependencies of nonNewtonian visco-elastic media with regard to the content of addition of nano-particles. The greater content of nano-particles and influences of superficial layer of cooperat...

The interest in techniques for enhanced oil recovery has grown due to the need to improve oil productivity reducing water injection and production. Although waterflooding is the most widely used method to recover oil, this process becomes less effective when the mobility ratio is unfavorable and the displacement efficiency is low. Furthermore, great volumes of injected and produced water lead t...

in this research, nano materials with tubular structures are added to sae 20w50 engine oil to study the rate of their effects on the properties of engine oil. multi-walled carbon nanotubes (mwcnts) and vanadium oxide nanotubes (vonts) has been used as two different additive materials, one of them is carbonic and the other is metallic oxides and their effect on  different parameters containing v...

We report novel polymeric materials that may be used as viscosity index improvers (VII) for lubricant applications. Our efforts included probing the comb-burst hyper-branched aryl polyester architecture for beneficial viscosity and friction behavior when utilized as an additive in a group I oil. The monomer was designed as to undergo polymerization via polycondensation within the architectural ...

Dilution is one of the various existing methods in reducing heavy crude oil viscosity. In this method, heavy crude oil is mixed with a solvent or lighter oil in order to achieve a certain viscosity. Thus, precise mixing rules are needed to estimate the viscosity of blend. In this work, new empirical models are developed for the calculation of the kinematic viscosity of crude oil and diluent ble...

Viscosity of vegetable oil is considered a constraint for its use as an alternate fuel for Internal Combustion(IC) engines. In this experimental investigation, the viscosity of cottonseed oil (CSO), which is considered a potential alternate fuel, is reduced by blending it in different proportions with diesel, and its viscosity at various temperatures was analyzed and used as a fuel in a compres...