The effect of temperature on the equilibrium sorption of Pb 2+ from aqueous solution onto a low-cost electric furnace slag was investigated. In this paper, two-parameter isotherm models namely the Langmuir and the Freundlich and three-parameter isotherm model namely Redlich–Peterson were applied to describe the isotherms and to calculate their constants. The best estimation of the parameters of...

Grape pomace (pulp and skins) was investigated as a new biosorbent for removing mycotoxins from liquid media. In vitro adsorption experiments showed that the pomace obtained from Primitivo grapes is able to sequester rapidly and simultaneously different mycotoxins. Aflatoxin B1 (AFB1) was the most adsorbed mycotoxin followed by zearalenone (ZEA), ochratoxin A (OTA), and fumonisin B1 (FB1), wher...

A new hybrid sorbent in the form of round beads containing modified poly(methyl methacrylate) (PMMA) waste immobilized in pectin and crosslinked with calcium ions was prepared. A previously obtained and characterized powdered poly(methyl methacrylate)-based sorbent was used. Batch and column studies on the new material's sorption-desorption properties were performed. Two kinetic models (pseudo-...

The sorption studies of coomassie brilliant blue (CBB) from aqueous solution have been carried out on wheat bran (WB). Coomassie brilliant blue on wheat bran was used to study the adsorption behavior under various parameters such as pH, dosage amount, and contact time. It was observed that under optimized conditions up to 95.70% dye could be removed from solution onto WB. Langmuir and Freundlic...

The biosorbent was obtained from municipal solid waste (MSW) of the Mostaganem city. Before use the MSW was dried in air for three days and washed several times. The sorption of yellow procion reactive dye MX-3R onto biomass from aqueous solution was investigated as function of pH, contact time and temperature. The adsorption capacity of MX-3R was 45.84 mg/g at pH 2-3 and room temperature. MX-3...

Experimental measurements have been made on the batch ion exchange of Ca(II) and Mg(II) from potassium chromate solution using cation exchanger of Amberlite IRC 748 as K+ form. The ion exchange behavior of two alkaline-earth metals on the resin, depending on contact time, pH, temperature and resin dosage was studied. The adsorption isotherms were described by means of the Langmuir and Freundlic...

Analytical isotherm equations such as Langmuir and Freundlich isotherms are widely used for modeling adsorption data. However, these isotherms are primarily useful for simulating data collected at a fixed pH value and cannot be easily adapted to simulate pH-dependent adsorption effects. Therefore, most adsorption studies currently use numerical surface-complexation models (SCMs), which are more...

Methyl orange is one dye resulted from the textile industry. The aim of this study is to test theadsorption capacity of nickel oxide nanoparticles for removing the methyl orange from aqueoussolution. The parameters studied were the effect of temperature, contact time and initial pH ofsolution. Results indicate that the removal efficiency of nickel oxide nanoparticles increases withincreasing co...

Introduction: Arsenic is known as a carcinogenic compound in drinking water. It can cause acute and chronic effects on human health. In this study, the effect of polyamidoamine dendrimer generation 3 (PAMAM G3) as adsorbents for removal of arsenic (V) from aqueous solutions was evaluated. Materials and Methods: Adsorption experiment was studied in batch system and the effect of different varia...

In this study the main physical-chemical characteristics of red ferralitic soil to use as substrate in subsurface wetlands was determined. The P-removal was evaluated in a short-term isotherm batch experiment and in a column percolation experiment. The acid characteristic and high content of iron minerals in the red ferralitic soil facilitated the phosphorus removal. Also the sorption isotherms...