The objective of the present study was to assess the influence of the roughness of a loaded surface on crack formation in a mica-based glass-ceramic bonded to a resin composite base. Five different surface roughnesses were created on glass-ceramic discs by serial wet-grinding with silicone carbide abrasives. The thicknesses of the ceramic discs were 1.50 +/- 0.01 mm. Resin composite discs were ...

In this work, wear behavior and microstructural characterization of porous layers produced in glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied under unidirectional sliding conditions against AISI316 and corundum counterbodies. Depending on the optical configuration of the laser beam and on the working parameters, the local temperature and pressure applied...

This paper investigated the surface reactivity of two sets of glasses and glass ceramic materials belonging to the Li2O–SiO2–CaO–P2O5–CaF2 system. The in vitro bioactivity of coatings was evaluated using simulated body fluid (SBF) and Dulbecco’s Modified Eagle’s Medium (DMEM) soaking test in static regime for up to 28 days at 36.5°C in microincubator. The surface structure changes were examined...

objective: the aim of this study was to compare the microtensile bond strengths (μ tbs) of three core materials with one lithium disilicate reinforced ceramic using two resin cements. methods: three core materials (nulite f® (biodental technologies), filtek z250® (3m-espe), prettau-anterior® (zirkonzhan, germany)) were prepared as blocks (10×10×4 mm3) according to the manufacturer’s instruction...

Microporous glass ceramic with skeleton of CaTi4(PO¬4)6 with average pore size of 12.7 nm has been synthesized and used as a carrier of glucose oxidase. The glass ceramic was prepared by controlled heat treatment of glass samples, which causes the phase separation in their structure and creates CaTi4(PO¬4)6 and β-Ca3(PO4)2 phases. The β-Ca3(PO4)2 phase was dissolved by soaking the glass ceramic...

OBJECTIVES The aim of this study was to evaluate the clinical performance of posterior, metal-free polymer crowns with and without a glass-fiber framework, in comparison to metal-ceramic crowns. METHODS After randomisation, 80 single crowns, manufactured from a newly designed polymer composite, were set in posterior teeth. Half of these received a glass-fiber framework, while half were prepar...

ceramic on light transmission of light-emitting diode (LED) and quartz-tungsten-halogen units (QTH) were evaluated. Ceramic IPS e.max CAD shades A1, A2, A3, A3.5, high (HT) and low (LT) translucency were cut (1, 2, 3, 4 and 5 mm). Light sources emission spectra were determined. Light intensity incident and transmitted through each ceramic sample was measured to determine light transmission perc...

Two glass ceramics in the CaO--P2O5--MgO system with the incorporation of K2O or TiO2 oxides were prepared with the goal of using them as potential bone graft substitutes. The incorporation of TiO2 and K2O led to the preparation of specific crystalline phases in the structure of the glass ceramics, which show different degrees of biodegradation. In fact, the 45CaO--45P2O5--5MgO--5K2O has been p...

Introduction: The aim of the present study was to evaluate the effect of glass ceramic insert in the sandwich technique to reduce microleakage in class II composite resin restorations. Methods: Sixty sound human upper second premolars were selected and randomly divided into six groups (n=10). Class II box-only cavities were prepared in distal aspects of each tooth with gingival margin located a...

The effect of iron oxide content on the crystallisation of a diopside glass–ceramic glaze was investigated using a glass–ceramic frit in the K2O–ZnO–MgO–CaO–Al2O3–SiO2 system and a granite waste glass. Measurements by X-ray diffraction (XRD) combined with scanning electron microscopy (SEM) and EDX microanalysis showed that the distribution of Fe ions among different crystalline phases such as f...