The sorption of uranyl onto hydrous ferric oxide (HFO) or hematite was measured by discontinuously titrating the suspensions with uranyl at pH 5.9, 6.8, and 7.8 under Pco2 = 10(-35)atm (sorption isotherms). Batch reactors were used with equilibration times up to 48 days. Sorption of 1 microM uranyl onto HFO was also measured versus pH (sorption edge). A diffuse double layer surface complexation...

Photoelectrochemical water oxidation on hematite has been extensively studied, yet the relationship between the various facets exposed, heteroatom doping, and associated electrocatalytic activity has not been adequately explored. Here, hematite nanocrystals were synthesized with continuous tuning of the aspect-ratio and fine control of the surface area ratio of the (0001) facet with respect to ...

Arsenic is present at relatively high concentrations in surface water and groundwater as a result of both natural impacts and anthropogenic discharge, which requires proper treatment before use. The present study describes As adsorption on a siderite-hematite filter as a function of activating condition, empty bed contact time, and As species. Hydrogen peroxide activating increased As adsorptio...

We report on a single-step coating process and the resulting colloidal stability of silica-coated spindle-type hematite nanoparticles (NPs) decorated with a layer of poly(acrylic acid) (PAA) polyelectrolyte chains that are partially incorporated into the silica shell. The stability of PAA coated NPs as a function of pH and salt concentration in water was compared to bare hematite particles and ...

The shape, porosity, and surface hydrophilicity of hematite particles formed from a forced hydrolysis reaction of acidic FeCl3 solution were controlled by using a trace of polymers (0.001 and 0.003 wt%). The spherical particles were produced on the systems with polyvinyl alcohol (PVA) and polyaspartic acid (PAS). In the case of polyacryl amide (PAAm), slightly small spherical particles were pre...

This work reports a study on the heterogeneous Fenton reaction using hematite powder (Fe2O3) in suspension for the discolouration of the reactive dye Drimarene Red X-6BN in aqueous solutions. The efficiency of the process was studied as a function of the experimental conditions: initial pH; H2O2 dose; and hematite powder concentration; all of which showed a strong effect on the reaction kinetic...

Introduction. Lane et al. [1] and Christensen et al. [2] conclude that the 1996 Global Surveyor Thermal Emission Spectrometer (TES, ~1700–200 cm) spectra of regions in Sinus Meridiani match only coarsely particulate hematite. Here we show spectra of hematite coatings that match the TES signatures. The coating option is important because (1) hematite coatings can require little water to form, wh...

An effective strategy to overcome the morphology evolution of hematite nanorods under high-temperature activation is presented, via tuning the crystallinity and sintering temperature by substrate modification. It is demonstrated that the as-prepared doping-free hematite nanorods with fine nanostructures obtain a significantly higher photocurrent density of 2.12 mA cm-2 at 1.23 V versus RHE, due...

In iron ore pelletizing plants a range of process parameters such as particle size distribution, specific surface area, and moisture, must be controlled to achieve optimized operation conditions. Particle size distribution and specific surface area are controlled during the grinding operations. Moisture, however, is controlled during filtration of the ground products. This work investigates the...

The Thermal Emission Spectrometer (TES) instrument on the Mars Global Surveyor (MGS) mission has discovered a remarkable accumulation of crystalline hematite (a-Fe2O3) that covers an area with very sharp boundaries approximately 350 by 350–750 km in size centered near 28S latitude between 08 and 58W longitude (Sinus Meridiani). Crystalline hematite is uniquely identified by the presence of fund...