Submerged arc welding also known as sub arc welding has become a chief welding process because of its ability to deposit large amounts of metal with high penetration. The quality of weld depends on bead geometry of the weld which in turn depends on the process variables. This paper deals with the application of factorial design approach for optimising four submerged arc welding parameters viz. ...

objective: the beneficial effects of clove on toothache have been well documented. we have also previously shown the analgesic effects of clove essential oil. the present work was done to investigate the analgesic effects of the aqueous extract of clove using hot plate test. the possible role of opioid receptors in the analgesic effects of clove was also investigated using naloxone. materials a...

morphine and tramadol which have analgesic effects can be administered acutely or chronically. this study tried to investigate the effect of these drugs at various times by using different methods of administration (intraperitoneal, oral, acute and chronic). sixty adult female rats were divided into six groups. they received saline, morphine or tramadol (20 to 125 mg/kg) daily for 15 days. a ho...

objective(s):reduction of pharmacological effectiveness or tolerance appears following repeated administration of many analgesic drugs. we investigated tolerance to anti-nociceptive effects of orexin-a, an endogenous potent analgesic peptide using the hot-plate test.materials and methods:orexin-a was microinjected icv (intracerebroventricular) with an interval of 12 hr for 7 continuous days and...

The various welding parameters such as welding speed, voltage and gas flow rate were varied on HSLA steel and the effects of these parameters on weld bead geometry such as penetration, width & height have been studied. Mathematical equations have been developed using factorial technique. And the result of various effects are shown in tables. (Numerical Values). INTRODUCTION Wide variety of stee...

Steel containing 0.03% carbon, 1.35% copper and 0.84% nickel had yield strength in the 540-625 MPa (78-90 Ksi) range depending on thickness, ultimate tensile strength in the 625-690 MPa (90100 Ksi) range, and 25-30% elongation when air cooled after hot rolling. No brittle heat-affected zone was formed during manual or automatic submerged arc welding without pre-heating or postheating. The fract...

Three-dimensional nonlinear thermal and thermo-mechanical numerical simulations are conducted for the friction stir welding (FSW) of 304L stainless steel. The finite element analysis code—WELDSIM, developed by the authors specifically for welding simulation, was used. Two welding cases with tool rotational speeds of 300 and 500 rpm are analyzed. The objective is to study the variation of transi...

This paper addresses the weld joint strength monitoring in pulsed metal inert gas welding (PMIGW) process. Response surface methodology is applied to perform welding experiments. A multilayer neural network model has been developed to predict the ultimate tensile stress (UTS) of welded plates. Six process parameters, namely pulse voltage, back-ground voltage, pulse duration, pulse frequency, wi...

Welding shrinkage and distortion affect the shape, dimensional accuracy and the strength of the finished product. This work concerns the prediction of welding distortion in a pulsed metal inert gas welding (PMIGW) process. Six different types of radial basis function network models have been developed to predict the distortion of welded plates. Six process parameters, namely pulse voltage, back...

the current work was carried out to characterize welding of aisi 310 austenitic stainless steel to inconel 657 nickel-chromium superalloy. the welds were produced using four types of filler materials; the nickel-based corresponding to inconel 82, inconel a, inconel 617 and austenitic stainless steels 310. of the two joints involved, this paper describes the choice of welding consumables for the...