نتایج جستجو برای: hybrid nano lubricant
تعداد نتایج: 243128 فیلتر نتایج به سال:
Nanoparticles have as characteristics super sliding, extreme pressure, self-healing, etc., which can improve the friction reduction and anti-wear performance of sliding components, when used lubricating oil additives. Nano-copper particles a good synergistic effect with other antifriction agents, antioxidants grease additives because their low shear strength grain boundary slip effect, showing ...
Nanofluid is a suspension obtained by adding nanoscale particles (100 nm) to a base fluid to improve heat transfer. In this study, the effect of temperature and concentration of nanoparticles consisting of Alumina nanoparticles and Graphene nanosheets on the thermal conductivity of a base fluid consisting of water and ethylene glycol was studied. Also, 0.2% by volume of oleic acid (OA) and 0.2%...
A key consideration for the efficient operation of hybrid solar cells based upon conjugated polymers and inorganic semiconductor nanocrystals is charge transport in the nanocrystal phase. Here we report the results of a study into the charge transport kinetics of polymer/nanocrystal solar cells based on blends poly(3-hexylthiophene) (P3HT) with either CdSe nano-dots or CdSe nano-tetrapods. Tran...
Objectives: Maintaining pulp vitality is a main goal in restorative dentistry. Introduction of pulp capping agents paved the way to eliminate the shortcomings of these materials and obtain successful restorations. On the other hand, nanotechnology is an emerging field of science with increasing use in dental materials. This study sought to assess the effect of addition of nano-TiO2, nano-SiO...
Carbon fiber (CF)-reinforced high-temperature thermoplastics such as poly(phenylene sulphide) (PPS) are widely used in structural composites for aerospace and automotive applications. The porosity of CF-reinforced polymers is a very important topic for practical applications since there is a direct correlation between void content and mechanical properties. In this study, inorganic fullerene-li...
Background. In vitro studies have revealed a direct association between resin content and cytotoxicity of composite resins; however, implantation studies in this regard are sparse. This study investigates the relationship between filler content of composite resins and biocompatibility. Methods. This research employed twelve 180‒200-gr male Wistar rats, 1 nano-hybrid (Prime-Dent Inc.) and 1 micr...
Cryogenic FIB-SEM is typically applied for milling and imaging of samples that are static in nature prior to cryopreservation, e.g. cells [1], sunscreen [2] or hydrated clays [3]. In contrast, here new routes of integrating cryo-FIB-SEM imaging into dynamic thermo-fluidic experimentation outside the microscope are described. This approach enables cross-sectional and 3D nanoscale imaging of diff...
The fabrication and advanced function of large area biomimetic superhydrophobic surfaces (SHS) and slippery lubricant-infused porous surfaces (SLIPS) are reported. The use of roll-to-roll nanoimprinting techniques enabled the continuous fabrication of SHS and SLIPS based on hierarchically wrinkled surfaces. Perfluoropolyether hybrid molds were used as flexible molds for roll-to-roll imprinting ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید